
ADDDITIONAL CHAIN (55M TO 80M 8MM) Part Number 1260-11-04
ANCHOR BRIDLE Part Number 1260-11-07
Using a bridle also prevents shock loading on the anchor chain and windlass. Once the anchor is set, the load should always be removed from the windlass, the best way to do this is by using a bridle attached to both bows. The bridle is made from two lengths of 16mm triple braid and includes a chain hook which is simple and easy to use and is fast to remove in an emergency situation.
ANCHOR CHAIN COUNTER Part Number 1260-11-08
Special Features:
- Preset stopping point on retrieval
- One-touch function to deploy and retrieve a preset length of rode
- Adjustable back lit display in feet, metres or fathoms
- Graphic LCD screen featuring intuitive user interface for simple operation
- Displays windlass speed and direction, plus battery voltage
- Safety lock to help protect against accidental windlass deployment
- Logs windlass operation hours to help ensure regular windlass maintenance
ANCHOR SECOND SYSTEM (35LB DELTA, 10M CHAIN & 50M ROPE) Part Number 1260-11-09
TIP: Tandem Primary Setup
In extreme conditions detach the secondary anchor from the rode and attach to the primary anchor providing additional holding capacity of the boats primary anchor system.

TIP: Bahamian Moor
Limit the range of swinging at anchor by to using the Bahamian moor. This setup consists of spacing two anchors off the bow by anchoring into the current, and then backing down to set the first hook. Continue reversing to twice the distance you ultimately plan to use for your rode. Drop the second anchor directly down-current from the first; make sure it’s set, and then position yourself halfway between the two. On some boats, it might be easier to use a stern cleat to set the second anchor because it keeps the rode away from the propellers. Once the second anchor is set, you can then transfer the line to the bow. The biggest concern with establishing a Bahamian moor is slack on the lines because that can lead to fouling one of the rodes in the boat’s running gear.

TIP: Double Anchoring
Another approach to anchoring just off the beach is most easily accomplished with a crew. Have a crew member drop the bow anchor offshore, positioned to allow the boat to be where you want it when it’s moored. He or she then pays out rode as you slowly idle bow first into shore, setting that anchor, but continuing on. Next, shut off the motors and raise the drive or outboard. Have the crew either drop the bow anchor or jump off and plant the bow anchor by hand. You pull the boat into the desired position by adjusting the length of the forward rode. Your crew adjusts the anchor on the beach and secures the boat in place by tightening the second rode.

PRIMARY ANCHOR UPGRADE TO 48LBS SARCA EXCEL Part Number 1260-11-10
Sarca Excel No 5 galvanised anchor is a certified Super High Holding Power anchor, it has a cast filled ballast to ensure self righting, it is a new design of 70 percent convex, 30 percent concave, part of this concave being the cutting edges.
Proven to perform over a wide range of varying sea floors, no scoop full of mud, no hoop makes it easy to fit all mono and multi hull bow roller arrangements. This is making the Excel yet another winner, both designs are of convex design, this means excel with no lead, no ploughing is easy on the environment, plus you leave the mud behind.
Features:
- Tangle resistant.
- Low centre of gravity self rights and keeps the toe hunting continuously to take advantage of the ocean floor.
- Full range of anchors have been tested for super high holding power certification.
- Unrivaled Holding Power
WINDLASS - FOOT SWITCH DOWN Part Number 1260-11-02
WINDLASS - UPGRADE WITH CAPSTAIN Part Number 1260-11-12
AIRCONDITIONING SALOON & MAIN CABINS COMPACT I16 VSD 16000BTU (110V 60HZ) Part Number 1260-13-03
Self-contained-VSD air conditioners provide the best of the existing technology: brushless DC motor with inverter drive that constantly control speed and power delivered by the compressor (Variable Speed Drive) together with the R410A refrigerant. The system consists one x 16,000BTU/h installed in the saloon powered saloon and two forward cabins.
The inverter technology, already used in residential air-conditioning, offers the following benefits in marine applications:
Highest energy efficiency: overall reduction of electricity consumption (-45%)
It can operates with small generators
Compressor noise and vibrations almost zero
Constant temperature of the air flow
Wi-fi connection for smartphone
The compressor continuously changes its running speed depending from ambient and set temperature. The compressor operates at maximum power to cool rapidly the cabins, but coming closer to the set temperature, it will reduce the power and electricity consumption. In this way it maintains the optimal comfort level with the minimum consumption. The inverter works between 20 and 100Hz. Self-contained-VSD Uflex units meet EMC 2004/108/EC directives.
AIRCONDITIONING SALOON & MAIN CABINS COMPACT I16 VSD 16000BTU (240V 50HZ) Part Number 1260-13-04
Self-contained-VSD air conditioners provide the best of the existing technology: brushless DC motor with inverter drive that constantly control speed and power delivered by the compressor (Variable Speed Drive) together with the R410A refrigerant. The system consists one x 16,000BTU/h installed in the saloon powered saloon and two forward cabins.
The inverter technology, already used in residential air-conditioning, offers the following benefits in marine applications:
Highest energy efficiency: overall reduction of electricity consumption (-45%)
It can operates with small generators
Compressor noise and vibrations almost zero
Constant temperature of the air flow
Wi-fi connection for smartphone
The compressor continuously changes its running speed depending from ambient and set temperature. The compressor operates at maximum power to cool rapidly the cabins, but coming closer to the set temperature, it will reduce the power and electricity consumption. In this way it maintains the optimal comfort level with the minimum consumption. The inverter works between 20 and 100Hz. Self-contained-VSD Uflex units meet EMC 2004/108/EC directives.
CHILD BUNK PORT FWD Part Number 1260-13-05
COCKPIT SIDE CLEAR Part Number 1260-13-06
DRAWER REFRIGERATOR Part Number 1260-13-07
DRAWERS UNDER STARBOARD AFT CABIN BERTH Part Number 1260-13-08
Note: This option can not be installed if the washing machine is also selected.
FAN CAFRAMO SIROCCO Part Number 1260-13-09
Features
Gimbaled design
12/24 Volt Auto-sensing capability
Improved switch control layout
Three Speeds
Four preset timer settings (3/6/9 or 12 hours)
Ultra quiet long-life motor with low power draw
Mounting footprint matches first generation Sirocco
Space friendly design
Made in Canada
Benefits
Complete 360° directional airflow
Works on all types of boats
Easy access
Controlled performance
Saves the boat’s battery
Ultra quiet comfort that is also battery friendly
Convenient to upgrade for existing Sirocco users
Allows the fan to be folded flat against the bulkhead when not in use
Easy to install
Tip: Add two fans in the master cabin to avoid mid night fights over the fan direction!
Optional 3-cabin fan loactions (1160/1190/1260)
Optional 4-cabin fan loactions (1160/1190/1260)
Optional 3-cabin fan loactions (1600)
FANS IN ALL CABINS, GALLEY & SALOON (8 in total) Part Number 1260-13-99
The finest in cabin comfort! The all new Sirocco II cabin fan is made in Canada and features a unique gimbaled design that allows 360 degree airflow versatile control layout, increased timer settings and quieter operation make the Sirocco II the perfect choice for cruising in comfort.
2x port fwd cabin
2x starboard fwd cabin
1 x aft stbd cabin
1 x galley
2 x saloon
FLEXITEAK DECKING (COCKPIT, TRANSOM STEPS) Part Number 1260-13-10
Flexiteek is a synthetic teak panel and it is made of composite materials, 100% recyclable to other products and its non–slip qualities are superb. This deck material does not fade, dry out, split or crack and requires minimal maintenance. Installed on Seawinds is "Flexiteek 2G", the newest version, which is 35% lighter in weight than the original Flexiteak, and suffers fewer problems associated with other synthetic decking because it doesn’t get as hot.
Please note that the default colour and caulking combination is "Flexiteak Scrubbed, with Black Caulking". That combination is cooler to the touch in hot climates, and is of the 2nd generation "Flexiteek 2G" variety.
- SpecificationFlexiteek is the original synthetic marine decking and a patented product world wide.
- Flexiteek is the market leader of synthetic marine decking.
- Flexiteek does not require sealing or difficult ongoing maintenance.
- Excellent non-slip surface. Wet or dry, Flexiteek provides amazing grip in the toughest conditions (ASTM D 4518).
- Flexiteek does not turn grey or fade.
- Stain resistant, soap and water will remove most spills easy (oil, fuel, red wine, fish blood etc).
- UV tested (ASTM G 154-00) and proven UV resistant.
- Welded system without adhesives which provides a deck that is waterproof.
- No screw holes- Flexiteek and the glue will work as a sandwich construction on your boat.
- Reduces sound and noise up to 11 db.
- Low combustibility (Flammability tested to AS/NZ 53837).
- Flexiteek comes with a 5 year material guarantee.
- All Flexiteek products are recyclable.
- Flexiteek has earned the respect of boat manufacturers for its high quality.
FORWARD DECK LOUNGE CUSHION Part Number 1260-13-11
As standard these seats are upholstered in Silverguard "Taupe" SG0009 exterior grade (or optional white pleated) vinyl.

Specifications Silverguard
100% waterproof
Very Strong (300.000 rubs Martindale)
UV Resistant
Resistant to low temperatures (-23ºC)
Antibacterial
Anti-fungal finish
Anti-Stain finish
Anti-Static finish
Easy to clean
Flame Retardant
Urine resistant
Blood resistant
Oil resistant
Sulfide Stain resistant
Cleaning
Please do not use abrasive cleaner!
For strong soils, we suggest to use a wet cloth with soap water.
Vyva Cleaner
GALLEY CUPBOARD LOWER Part Number 1260-13-13
Note: The featured image depicts a 1260 lower cupboard. If optioned on another Seawind model the materials used will match the fitout of the rest of your boat.
Note: This option cannot be selected on boats with airconditioning.
GALLEY MICROWAVE AND CUPBOARD (FULL WIDTH) + 110V GPO Part Number 1260-13-14
Note: The featured image depicts a 1260 lower cupboard. If optioned on another Seawind model the materials used will match the fitout of the rest of your boat.
Note: This option cannot be selected on boats with air conditioning.
GALLEY MICROWAVE AND CUPBOARD (FULL WIDTH) + 240V GPO Part Number 1260-13-15
Note: The featured image depicts a 1260 lower cupboard. If optioned on another Seawind model the materials used will match the fitout of the rest of your boat.
Note: This option cannot be selected on boats with air conditioning.
GALLEY MICROWAVE AND CUPBOARD (HALF WIDTH) + 110V GPO Part Number 1260-13-16
Note: The featured image depicts a 1260 microwave cupboard. If optioned on another Seawind model the materials used will match the fitout of the rest of your boat.
GALLEY MICROWAVE AND CUPBOARD (HALF WIDTH) + 240V GPO Part Number 1260-13-17
Note: The featured image depicts a 1260 microwave cupboard. If optioned on another Seawind model the materials used will match the fitout of the rest of your boat.
INSECT SCREEN FOR FWD OPENING WINDOWS Part Number 1260-13-18
LEATHER UPSHOLSTERY Part Number 1260-13-19
MARINE VINYL COCKPIT FLOORING Part Number 1260-13-20
SCREEN HATCH SKY - BLACKOUT/INSECT (1) Part Number 1260-13-21
Locations
Install in up to 5 locations: port fwd cabin: x2, stbd fwd cabin x1, port midships x1, stbd midships x1
Features
Offers heat and light control as well as insect prevention
100% blackout blind
Tightest screen mesh available
A stylish, practical, and functional alternative to hatch blinds
Easy to use magnetic, low profile handle system
Models available for all hatch manufactures
Integral hatch liner solution available for all models
Specifications
Aluminum frame, polyester powder coated with pretreatment
Colors White and Beige
Stainless steel recoil springs
Fiberglass PVC coated flyscreen mesh
Heat reflective and water repellant blackout fabric
White silicone seal - Ultra-Violet stabilized
SCREEN INSECT - SIDE HATCH (3) Part Number 1260-13-22
SCREENS CABIN'S PRIVACY (6) Part Number 1260-13-23
Features
- Marinised to withstand the rigours of the harsh marine environment
- Simple installation, all mounting hardware included
- Water repellent, heat reflective and 0% light transmission fabric
- Available in a range of standard hatch sizes from your local chandlery
- Custom sizes available
SCREENS MIDSHIPS PRIVACY (4) Part Number 1260-13-24
Features
- Marinised to withstand the rigours of the harsh marine environment
- Simple installation, all mounting hardware included
- Water repellent, heat reflective and 0% light transmission fabric
- Available in a range of standard hatch sizes from your local chandlery
- Custom sizes available
SCREENS SALOON SHADE CLIP ON Part Number 1260-13-25
SCREENS TOILET PRIVACY (3) Part Number 1260-13-26
Features
- Marinised to withstand the rigours of the harsh marine environment
- Simple installation, all mounting hardware included
- Water repellent, heat reflective and 0% light transmission fabric
- Available in a range of standard hatch sizes from your local chandlery
- Custom sizes available
WEBASTO HYDRONIC DIESEL HEATER SYSTEM (110v) Part Number 1260-13-27
Specifications
Thermo Top C | |
Heat output (kW) | 2.6 |
Partial load / Full load | 2.2 |
Fuel consumption (l/h) | 0.36 |
Partial load / Full load | 0.36 |
Power consumption (W) | 32 |
Partial load / Full load | 34 |
Net weight (kg) | 3.2 |
WEBASTO HYDRONIC DIESEL HEATER SYSTEM (220v) Part Number 1260-13-28
Webasto water heaters not only ensure even heat distribution in the boat, but also provide domestic hot water in connection with a water boiler. These heaters can be installed in the engine room with minimum space requirements, and can be easily combined with Webasto chiller air-conditioners to form an integrated climate control system.
This option includes radiators mounted in each of the fwd cabins and one saloon mounted radiator outlet. With this option we also install a webasto water heater with dual heat exchange inlets allowing you to heat 40l of drinking water from your diesel heater as well as your engines (on diesel egine models).
ADVANTAGES
Heating comfort just like at home
Even distribution of warmth by means of radiators
Hot water for the shower and galley
Silent operation
Space-saving installation in the engine room
Separate temperature control in every cabin
Low fuel consumption
Compact design
Preheating of the engine possible to avoid cold starts
Meet current requirements and standards relating to boats
Robust aluminum casing, resistant to high temperature or salt
Heat output 5.0 - 5.2 kW (17,100 - 17,700 BTU / h)
ADDITIONAL 12V OUTLET Part Number 1260-14-10
ADDITIONAL 12V USB OUTLET Part Number 1260-14-11
ADDITIONAL 12V/ 24V USB-C TYPE OUTLET Part Number 1260-14-12
Charge USB C and standard USB phones and tablets, such as , Galaxy Note 7,Google Pixel XL, iPhone 8/ 8 Plus/ X/ 7/ 6S, Samsung Note 9/ Galaxy S9/ S9+/ S8/ S8+/ S7,Note 8, Tabpro S/ S8/ S8 Plus/ Nintendo Switch, HTC 10, iPad, android tablets, power banks, video games controllers, sports watch etc.
AQUALUMAR SERIES 6 UNDERWATER THROUGH HULL LIGHT (2) Part Number 1260-14-13
Light up your Seawind with the Aqualuma 6 series underwater lights package. The package includes 2x underwater lights and can be selected up to 4 times to include the locations: inboard transom (most popular), outboard transom, outboard midships, outboard bow.
Designed with long life in mind, the all new 6 Series is corrosion-proof and features Aqualuma’s injection-moulded, patented polymer housing – the most sophisticated material in underwater lighting available. The 6 Series is fully serviceable and upgradable without the need for haul out.
Standard color: BLUE
BATTERY 12V/ 200AH DEEP CYCLE GEL ADDITIONAL Part Number 1260-14-73
In Gel batteries, the electrolyte is absorbed by a Gel. This type of battery is entirely maintenance-free and has no gas formation with normal use. As no extra ventilation is required, Gel batteries can be installed anywhere. They are ideal as service battery and for cyclical use, and can be charged very quickly.
- Perfect service battery for medium sized and large 12 V and 24 V systems.
- Extremely long lifespan.
- No gas formation with normal use.
- Fast recharge, high charge current possible.
- For intensive cycle use with a high number of charge/discharge cycles.
- Very low self-discharge.
- High return on investment.
BATTERY CHARGER / INVERTER: MASTERVOLT 12V/2600W/100AMP (220V) WITH CONTROLLER Part Number 1260-14-15
Designed with the customer in mind and using the latest technology, the CombiMaster range is all about user-friendliness and reliability. But don’t let that friendly appearance misguide you: the powerful CombiMaster range drives even the heaviest and most sensitive loads with ease!
With the CombiMaster, power dips and failures belong to the past. The automatic AC transfer system switches between generator or mains and inverter output, ensuring a constant power supply. Its Power Assist function prevents tripping of the mains fuse in case you’re connected to a weak land line or small generator.
The CombiMaster range delivers unmatched performance and value for money. As you would expect from Mastervolt, the CombiMaster is completed with MasterBus, CZone and NMEA 2000 compatible communication, allowing for a broad range of monitoring and system integration options.
Remote Control and Monitoring options
- MasterBus compatible via SmartRemote or EasyView 5 display.
- CZone / NMEA 2000 compatible via Touch 5 or Touch 10 display.
- NMEA 2000 compatible via 3rd party multifunctional display.
Features
- Most compact and lightweight Combi in its class.
- Reliable, hum-free and longer operation from your batteries.
- Starts even the heaviest and most sensitive loads.
- Intelligent 3-step+ battery charger for faster and safer charging.
- Automatic switching between mains and inverter mode.
- Power Assist prevents blown mains fuses.
- Generator compatible.
- Integrated CZone, MasterBus and NMEA 2000 communication.
- Quick installation with heavy duty connections.
- E-mark certified.
NMEA 2000 compatible via 3rd party multifunctional display.
Specifications: https://www.mastervolt.com/products/combimaster/combimaster-24-3000-60-230-v/pdf/
BATTERY CHARGER / INVERTER: MASTERVOLT 2600W/100AMP 110v WITH CONTROLLER Part Number 1260-14-16
Designed with the customer in mind and using the latest technology, the CombiMaster range is all about user-friendliness and reliability. But don’t let that friendly appearance misguide you: the powerful CombiMaster range drives even the heaviest and most sensitive loads with ease!
With the CombiMaster, power dips and failures belong to the past. The automatic AC transfer system switches between generator or mains and inverter output, ensuring a constant power supply. Its Power Assist function prevents tripping of the mains fuse in case you’re connected to a weak land line or small generator.
The CombiMaster range delivers unmatched performance and value for money. As you would expect from Mastervolt, the CombiMaster is completed with MasterBus, CZone and NMEA 2000 compatible communication, allowing for a broad range of monitoring and system integration options.
Remote Control and Monitoring options
- MasterBus compatible via SmartRemote or EasyView 5 display.
- CZone / NMEA 2000 compatible via Touch 5 or Touch 10 display.
- NMEA 2000 compatible via 3rd party multifunctional display.
Features
- Most compact and lightweight Combi in its class.
- Reliable, hum-free and longer operation from your batteries.
- Starts even the heaviest and most sensitive loads.
- Intelligent 3-step+ battery charger for faster and safer charging.
- Automatic switching between mains and inverter mode.
- Power Assist prevents blown mains fuses.
- Generator compatible.
- Integrated CZone, MasterBus and NMEA 2000 communication.
- Quick installation with heavy duty connections.
- E-mark certified.
Specifications: https://www.mastervolt.com/products/combimaster/combimaster-12-3000-160-120-v/
BATTERY LITHIUM UPGRADE (920AH) Part Number 1260-14-17
Change from the standard AGM battery system to a high capacity Lithium system from Mastervolt. This option not only upgrades the batteries but also modifies the entire charging system ensuring a total compatible system including upgraded mastervolt alternators and regulators, additional AGM start battery and DC/DC charging unit.
Standard battery system specifications
2x 225AH AGM House Batteries (63.5kg each) + 1x 130AH (AGM) Start Battery (37.6kg) = 164.6kg
Usable house amp hours (AGM's = 50%) = 225AH
Lithium battery system specifications
2x 460AH Lithium House Batteries (58kg each) + 1x 130AH (AGM) Start Batteriey (37.6kg ) = 153.6kg
2x Alpha Pro MB, Mastervolt Alternators (10.1kg each) = 20.2kg
Usable house amp hours (Lithium = 80%) = 736AH
Gain of: 511AH
Additional weight: 9.2kg
C-ZONE DIGITAL SWITCHING (DC) Part Number 1260-14-18
Features
- Easy to use touch interface.
- Glass dash styling.
- Super bright widescreen display.
- Low profile flush mounting.
- Reduced system cost and complexity, combines display and Wireless Interface functionality into one unit.
- IPX7 water ingress protection.
- Built-in WiFi connectivity.
The CZone system, features built-in timers, dimmers, alarms, voltage reducers and load shedding. With safety in mind, the CZone system features a manual bypass. Their No-Single-Failure-Point technology ensures a plug & play system with redundancies that is designed to handle mishaps. If a module is damaged, the system will automatically program the replacement module when it is plugged in. This means any module can be replaced without using high tech service people. Our security features allow custom configurations that can be locked.
The CZone system is NMEA 2000 certified and uses the standard Micro cables and connectors. This also allows a single network backbone to be installed for multiple systems (CZone and other NMEA 2000 devices). Additionally, the CZone system can share certain monitoring functions with other NMEA 2000 compliant screens. The CZone MasterBus Bridge Interface expands the system integration to a whole new level. No other company can bring digital switching, power electronics and marine navigation systems together into one interactive, seamless system.
DUAL VOLTAGE CHARGING Part Number 1260-14-19
ChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of two or three batteries in a fast and safe way and works anywhere in the world.
With the new Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method. Other unique features are:
- Revival mode: automatically revives even fully depleted batteries.
- Multi voltage: charge 12 V starter battery in a 24 V system, without additional components (for 24 V models only).
- Priority Charge: redirect available power to the lowest battery, for faster charging.
- Smart Input: charge all three batteries from one single alternator for continuous charging on the go.
Global Charging
The ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, the ChargeMaster Plus is CE, ABYC, UL, SAE, CEC/DOE and RCM/C-Tick compliant.
System Simplicity
Nowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of all outputs in an understandable way. Robust and ergonomic connections save installation time. An integrated VSR eliminates the need for additional components and ensures that the alternators energy is funnelled through to the batteries.
Powerful Communications thanks to CZone integration
In modern applications, all electrical components work together. The CAN-based MasterBus enables the ChargeMaster Plus to communicate with displays, shunts and power systems including communication standards like CZone®, NMEA 2000 and CANopen (through additional interfaces).
Models with the addition CZone do not only support MasterBus, but also support CZone and NMEA 2000 communication, without the need of additional interfaces. This ChargeMasters Plus series can be configured via MasterBus or will accept a CZone configuration file just like any other CZone device. Other communication standards like ModBus, CANopen, LinBus, etc. are supported via additional interfaces.
This wide range of communication interfaces makes the ChargeMaster Plus ideally suited for system integration. In addition, the ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.
Features
- Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR.
- Charges Lithium Ion, Gel and AGM batteries, the 24 V models also charge large or small battery banks on a single battery charger.
- Combine Lithium Ion, Gel or AGM, and large or small battery
- Charges multiple batteries while being underway.
- Extended specifications: offers 20 % more output at 14.4 V and 80 % charging power at 60 °C.
- Safe Charge: quickly recognize the State of Charge for extended battery life.
- Very wide operating range of 80-275 V AC, 35-70 Hz.
- Compact, easy to connect and quick to install
GENERATOR FISHER PANDA 5000i Neo (240v) Part Number 1260-14-21
The new 5000i.Neo iSeries generator features the Fischer Panda water-cooled FPE320 single cylinder engine. Panda iSeries generators are the first of the next generation of compact, super silent and powerful generators. Using modern diesel engines which meet the latest emission standards and variable speed technology, the operating speed can be adjusted to match the load to ensure an efficiency while supplying extremely stable voltage and frequency. Fischer Panda iSeries generators are fitted with the highly regarded sound insulation and water-cooling. The Panda iSeries generators have been especially designed to be light and compact - up to 30 % weight and space savings!
Features:
- Digital display
- Output: 4kW / 5kVA
- Environmentally friendly - low fuel consumption
- Variable speed - load-dependent
- Easy to install - reduces costs
- Small size and low weight - compact installation
- High starting capacity for air conditioners / diving compressors
- Highly efficient - maximum energy
- Low ambient temperatures
- External control panel with cable
- Dual circuit cooling
INTERIOR MOOD LIGHTING - WARM WHITE Part Number 1260-14-39
Strip lighting under the companionway steps and behind the saloon speakers provides soft ambient lighting when the overhead lights are turned off.
This option comes standard in warm white.
ISOLATION TRANSFORMER 3.5KW (110V) Part Number 1260-14-36
A safe connection between vessel and shore installation is an essential part of your electrical system. A galvanic electrical isolation between shore power and the on board power prevents any electrical corrosion of metal parts while keeping you earthed.
- Ultra modern high-frequency electronic switch technology.
- Lightweight and compact.
- Integrated Soft Start function.
- Connect to voltages from 90 to 255 V and from 45 to 65 Hz.
- Units can be parallel coupled for higher capacity.
- Higher efficiency, limited heat development.
The Mass GI 7 is supplied with the latest high-frequency switching technology as well as Soft Start for peak loads when connecting to the grid. LED lights on the casing indicate load and overload. The transformer can be remote controlled. The Mass GI is 75 % lighter and 60 % smaller than to low frequency transformers.
For 110v power, 1 x 32 A/7 KW to be used to give a total output of 3.5KW.
SPECIFICATION:
Output voltage (± 5 %) | 90-255 V |
Output frequency range | 45-65 Hz |
Input voltage range | 90-255 V |
Input frequency range | 45-65 Hz |
Nominal input current (230 V) | 32 A |
Galvanic isolation | yes |
Efficiency | > 93 % |
Power 230 V (120 V) | 7000 VA (3840) VA |
Dimensions, hxwxd | 340 x 261 x 250 mm 13.4 x 10.3 x 9.8 inch |
Weight | 10 kg 22.0 lb |
Compliance | CE, ABYC |
ISOLATION TRANSFORMER 3.5KW (240V) Part Number 1260-14-38
A safe connection between vessel and shore installation is an essential part of your electrical system. A galvanic electrical isolation between shore power and the on board power prevents any electrical corrosion of metal parts while keeping you earthed.
- Ultra modern high-frequency electronic switch technology.
- Lightweight and compact.
- Integrated Soft Start function.
- Connect to voltages from 90 to 255 V and from 45 to 65 Hz.
- Units can be parallel coupled for higher capacity.
- Higher efficiency, limited heat development.
SPECIFICATION:
Output voltage (± 5 %) | 90-255 V |
Output frequency range | 45-65 Hz |
Input voltage range | 90-255 V |
Input frequency range | 45-65 Hz |
Nominal input current (230 V) | 16 A |
Galvanic isolation | yes |
Efficiency | > 93 % |
Power 230 V (120 V) | 3500 VA (1920) VA |
Parallel configuration | to 4 units parallel (= 14 kW) |
Dimensions, hxwxd | 340 x 261 x 144 mm 13.4 x 10.3 x 5.7 inch |
Weight | 6 kg 13.2 lb |
Compliance | CE, ABYC |
LED HELLA MEGA BEAM DECK LIGHT UPGRADE Part Number 1260-14-24
Specifications
Article status | Delivery time on request |
Light source | LED |
Light colour(s) | Cool white 6.500K |
Warranty | 5 Year fit and forget |
Light beam | Wide beam |
Power consumption | 13 Watt |
Light output | 800 Lumen |
Power consumption | 12 Volt 1.08 Ampere - 24 Volt 0.54 Ampere |
LED HELLA STERN MOUNTED SQUID LGHT Part Number 1260-14-23
Tip: As squid are attracted to light sources, so turning this light on while fishing for your next meal could seariously enhance your odds of a catch.
Specifications
Article status | Delivery time on request |
Light source | LED |
Light colour(s) | Cool white 6.500K |
Warranty | 5 Year fit and forget |
Light beam | Wide beam |
Power consumption | 13 Watt |
Light output | 800 Lumen |
Power consumption | 12 Volt 1.08 Ampere - 24 Volt 0.54 Ampere |
LIGHT DIMMER 6 GROUPS (SALOON X1, STBD X3, PORT SIDE X2) Part Number 1260-14-25
Sophisticated voltage regulation with a ‘soft-start’ feature to lengthen the life of a filament bulbs. The dimmer also provides low voltage protection against deep battery discharge. When batteries are charged voltage can rise to 14.4V on 12V systems or 28.8V on 24V systems, this can shorten the life of bulbs.
The 2 Group Dimmer increases bulb life through sophisticated internal voltage regulation, ensuring the lighting circuit voltage does not rise above 12V or 24V. As halogen bulbs also have a high inrush current on start up, the 2 Group Dimmer features ‘soft-start’ to further lengthen bulb life.
The dimmers low voltage protection also protects against deep battery discharge. Lights will turn off automatically when battery voltage is lower than 9V on a 12V system or lower than 18V on a 24V system. Lights can be switched on again when the battery is charged and reaches 12V or 24V respectively.
- Precise dimming control for 1 or 2 light groups
- Voltage regulation & ‘soft-start’ bulb protection
- Low voltage battery protection
- 12V and 24V DC
LIGHTNING PROTECTION Part Number 1260-14-26
Earth Plate Specs
Surface area: 1100 sq cm (1.21 sq ft); Dimensions 240x130x20mm (9.5x5x0.75in); Impedance less than 1 ohm (measured) at 5 MHz in sea water; Integral copper studs with stainless steel washers and nuts for fitting and connection.
To comply with latest Australian Standards, two of these plates must be used to attain the right level of earth connection from the hull to the sea.
Note
This option is a requirement for all Australian charter vessels.
SHORE POWER & DOUBLE GPO 3X INC GAVANIC BLOCKER (110V & US TYPE OUTLET) Part Number 1260-14-61
This option provides shoreside electrical power to the boat at berth. The source for land-based power may be grid power from an electric utility company, but also possibly an external portable generator, sitting in the cockpit. In this package Seawind installs a galvanic blocker, earth plate below waterline, rcd circuit breakers and 3 double gpo's (general purpose outlets). One gpo will be installed in the galley, one in the saloon and one at the navigation desk.
Note
Gpo's will be type B with USB-C & A
Note
This option is required before an invertor, generator or additional 110v gpo's can be optioned.
SHORE POWER & DOUBLE GPO 3X INC GAVANIC BLOCKER (230V & AUSTRALIAN OUTLETS) Part Number 1260-14-62
This option provides shoreside electrical power to the boat at berth. The source for land-based power may be grid power from an electric utility company, but also possibly an external portable generator, sitting in the cockpit. In this package Seawind installs a galvanic blocker, earth plate below waterline, rcd circuit breakers and 3 double gpo's (general purpose outlets). One gpo will be installed in the galley, one in the saloon and one at the navigation desk.
Note
GPO's will be type I with USB-C & A
Note
This option is required before an invertor, generator or additional 240v gpo's can be optioned.
SHORE POWER & DOUBLE GPO 3X INC GAVANIC BLOCKER (230V & EU OUTLETS) Part Number 1260-14-63
This option provides shoreside electrical power to the boat at berth. The source for land-based power may be grid power from an electric utility company, but also possibly an external portable generator, sitting in the cockpit. In this package Seawind installs a galvanic blocker, earth plate below waterline, rcd circuit breakers and 3 double gpo's (general purpose outlets). One gpo will be installed in the galley, one in the saloon and one at the navigation desk.
Note
GPO's will be type F with USB-C & A
Note
This option is required before an invertor, generator or additional 240v gpo's can be optioned.
SHORE POWER & DOUBLE GPO 3X INC GAVANIC BLOCKER (230V & UK OUTLETS) Part Number 1260-14-64
This option provides shoreside electrical power to the boat at berth. The source for land-based power may be grid power from an electric utility company, but also possibly an external portable generator, sitting in the cockpit. In this package Seawind installs a galvanic blocker, earth plate below waterline, rcd circuit breakers and 3 double gpo's (general purpose outlets). One gpo will be installed in the galley, one in the saloon and one at the navigation desk.
Note
GPO's will be type G with USB-C & A
Note
This option is required before an invertor, generator or additional 240v gpo's can be optioned.
SHORE POWER & DOUBLE GPO 3X INC GAVANIC BLOCKER (230V WITH UNIVERSAL OUTLETS) Part Number 1260-14-65
This option provides shoreside electrical power to the boat at berth. The source for land-based power may be grid power from an electric utility company, but also possibly an external portable generator, sitting in the cockpit. In this package Seawind installs a galvanic blocker, earth plate below waterline, rcd circuit breakers and 3 double gpo's (general purpose outlets). One gpo will be installed in the galley, one in the saloon and one at the navigation desk.
Note
GPO's will be type Universal type with USB-C & A
Note
This option is required before an invertor, generator or additional 240v gpo's can be optioned.
SHORE POWER ADDITIONAL GPO (110V & US type outlet) Part Number 1260-14-51
Additional 110v power outlet. Socket will be type B.
This option first requires shore power option to be selected
SHORE POWER ADDITIONAL GPO (230v & Australian type outlet) Part Number 1260-14-52
Additional 230V power outlet. Socket will be type I.
This option first requires shore power option to be selected
SHORE POWER ADDITIONAL GPO (230V & EU type outlet) Part Number 1260-14-53
Additional 230v power outlet. Socket will be type F.
This option first requires shore power option to be selected.
SHORE POWER ADDITIONAL GPO (230V & UK type outlet) Part Number 1260-14-54
Additional 230v power outlet. Socket will be type G.
This option first requires shore power option to be selected
SHORE POWER ADDITIONAL GPO (230V & Universal type outlet) Part Number 1260-14-55
Additional 230v power outlet. Universal socket with USB-C and USB-A included
This option first requires shore power option to be selected.
This option is not available in 110V.
SHORE POWER ADDITIONAL GPO FOR WET AREAS (110V & US type outlet) Part Number 1260-14-56
Additional 110v power outlet with waterproof enclosure to be installed wet areas such as in bathrooms. Socket will be type B.
This option first requires shore power option to be selected
SHORE POWER ADDITIONAL GPO FOR WET AREAS (230V & Australian type outlet) Part Number 1260-14-57
Additional 230v power outlet with waterproof enclosure to be installed wet areas such as in bathrooms. Socket will be type I.
This option first requires shore power option to be selected
SHORE POWER ADDITIONAL GPO FOR WET AREAS (230V & EU type outlet) Part Number 1260-14-58
Additional 230v power outlet with waterproof enclosure to be installed wet areas such as in bathrooms. Socket will be type F.
This option first requires shore power option to be selected.
SHORE POWER ADDITIONAL GPO FOR WET AREAS (230V & UK type outlet) Part Number 1260-14-59
Additional 230v power outlet with waterproof enclosure to be installed wet areas such as in bathrooms. Socket will be type G.
This option first requires shore power option to be selected.
SHORE POWER ADDITIONAL GPO FOR WET AREAS (230V & Universal type outlet) Part Number 1260-14-60
Additional 230v power outlet with waterproof enclosure to be installed wet areas such as in bathrooms. Universal socket with USB-C and USB-A included
This option first requires shore power option to be selected.
This option is not available in 110V.
SOLAR PANEL UPGRADE TO 1440W INCLUDES 4 X 360W RIGID PANELS Part Number 1260-14-48
Increase your charging capacity by upgrading to 4x larger 360W solar panels. This will bring you from the standard setup of 330W (2x 165W) cockpit mounted panels to 1440W of charging power. A 60AMP Maximum Power Point Tracking (MPPT) Mastervolt regulator is also included in this option to make efficient use of all that extra power. This option includes stainless aft supports and davit extension, improving the ease of raising and lowering your dinghy from the transom.
NOTE: This option has an overhang of the transom, extending the total boat length to 12.54m / 41"1"
SOLAR PANEL UPGRADE TO 720W INCLUDES 2X360W RIGID PANELS Part Number 1260-14-47
Increase your charging capacity by upgrading the standard cockpit mounted solar panels to 2 x 360W solar panels mounted on cockpit roof. This will bring you from the standard setup of 330W (2x 165W) to 720W of charging power. A 60AMP Maximum Power Point Tracking (MPPT) regulator is also included in this option to make efficient use of all that extra power.
TRANSOM STEP LIGHT (8) Part Number 1260-14-33
Light is radiated downward at an angle of 30° making these transom step lamps ideal for illuminating the stairs, when boarding at night.
Standard color: White
Tip
Turn on your step lights when leaving your boat in a crowded anchorage making it easier to find and safer to board when returning late at night.
WASHING MACHINE - 3.2KG 240V/ 50HZ Part Number 1260-14-35
The 3.2kg washing machine makes modern life onboard easy and comfortable. The unit is installed under the stbd aft bunk. When in opperation the boat should either be connected to shore power or generator.
Features
Fully automatic freshwater washing machine featuring 5 programmable wash settings including gentle wash through to full cycle.
LED display, unbalance detection, and basket with lockable tabs.
This option includes power supply and overboard drainage.
WASHING MACHINE - 3.2KG 110V/ 60HZ Part Number 1260-14-34
The 3.2kg washing machine makes modern life onboard easy and comfortable. The unit is installed under the starboard aft bunk. When in operation the boat should either be connected to shore power or generator.
Features
Fully automatic freshwater washing machine featuring 5 programmable wash settings including gentle wash through to full cycle.
LED display, unbalance detection, and basket with lockable tabs.
This option includes power supply and overboard drainage.
DUAL TELEFLEX ENGINE CONTROLLS - MECHANICAL Part Number 1260-15-04
PROPELLER 3 BLADE GORI FOLDING UPGRADE Part Number 1260-15-05
FULL SPEED UNDER SAIL
Folding propellers have been reserved for small or medium size sailboats with moderate engine power. They have been able to obtain, under sail, the extra speed the folding propeller allows with the minimum drag. The 3-blade Gori folding propeller brings these advantages within the reach of larger sailboats and motor sailors. The extra speed under sail is substantial. The design prevents seaweed etc fouling on the propeller. A further potential for optimum speed. Tests by major yachting magazines have shown that the 3-blade Gori folding propeller has a much lower drag than any other well-known 3-blade sailboat propeller, no matter if it is a folding propeller or a feathering propeller.
EFFECTIVE FOR ENGINES FROM 10HP TO 300HP (7 – 221KW)
The propeller revolution for larger sailboats and motorsailers is emphasized by the fact that this propeller can be used for boats fitted with engines from approximately 10hp (7kW) and up to approximatley 300hp (221kW), and the power transfer is on the whole the same as for fixed 3-blade propellers. The design of the Gori propeller results in minimum noise and vibration, which is often a problem for the well-known types of feathering propellers. This propeller is offered in diameters from 15″ and up to 30″. Tests by major yachting magazines have shown that the 3-blade Gori folding propeller has a much better efficiency both forward (+11%) and reverse (+6,5%) than a feathering propeller.
PROFESSIONAL QUALITY
Gori propeller has for more than 20 years been leading the field in development of folding propellers. The 3-blade Gori folding propeller underlines Gori propeller’s technological leading position, which is protested by patents pending. The 2-blade Gori folding propellers have for over 20 years proved their superiority and quality. They have been a natural choice for boats exposed to the most intense strains, for example during the Whitbread Round the World Race. The 3-blade Gori folding propeller is manufactured in the same professional quality, where every single propeller has its own number and a “logbook” during production. Each propeller is balanced dynamically.
ROPE CUTTER -SHAFT SHARK Part Number 1260-15-01
Protect your drive train and propeller with the best rope, line and debris cutter there is. Available for both power and sail.
The SHAFT SHARK is a serrated edge circular blade machined from high quality (316L) type stainless steel. It is easy to install; no drilling, tapping or dismantling. It is available as a split 2x piece unit for quick and simple installation, no need to remove propeller.
Zero maintenance since there are no moving parts (cutters/bearings/zincs/stops) to maintain or replace annually. Easily re-sharpened if necessary.
What does it do?
Attached to your shaft just forward of your propeller, it rotates with the shaft, cutting away any rope, weed or debris that might try to entangle your shaft and propeller while you are underway.
* NOTE: SW1160 & 1190 model requires option 18926: YANMAR 29HP INBOARD DEISEL SAILDRIVES UPGRADE FROM OUTBOARD ENGINES YANMAR UPGRADE FROM 29HP TO 40HP WITH 3 BLADE FOLDING PROPS Part Number 1260-15-07
YANMAR introduces the 3JH40 as the world’s smallest common rail inboard marine diesel engine in displacement, dimensions, and weight.
The 3-cylinder 3JH40, with an output of 40 mhp, will enable a whole new category of smaller leisure boat owners and commercial vessel operators to benefit for the first time from the efficiency and performance advantages associated with the most recent electronically-managed CR fuel-injection technology.
With an output of 40 MHP @ 3000 rpm (29.4 kW @ 3000 rpm), the 3JH40 is the smallest common rail inboard marine diesel in:
Displacement, with only 3 cylinders measuring 1.642 L (100 cu in)- Physical size, measuring 774 x 580 x 632mm
- Weight, measuring 192kg without gear
Through common rail technology, the 3JH40 offers minimal fuel consumption and exceptionally low noise and emission levels, exceeding EPA Tier 3 and EU RCD Tier 2 emission regulations for virtually smoke and odor-free operation.
The 4-stroke, water-cooled 3JH40 is an ideal solution for new builds and repowering applications, specifically monohull sailing yachts and catamarans up to 45ft, small motor boats or sloops, and light duty commercial craft.
RATED OUTPUT | 29.4 kW / 40 mhp |
RATED SPEED | 3000 rpm |
DISPLACEMENT | 1.642 L [100 cu in] |
CYLINDERS | 3 in-line |
BORE X STROKE | 88 mm x 90 mm |
TYPE | 4-stroke, vertical, water-cooled diesel engine |
EMISSION COMPLIANCE | EU: RCD 2, BSO II, EMC. US: EPA Tier 3. |
ADDITIONAL 2 X SPEAKERS AMPLIFIER & SUBWOOFER Part Number 1260-16-01
The MS-AB206 features a 6" dual voice coil down-firing woofer which is acoustically coupled to a matching passive radiator, producing exceptional bass reproduction. The passive radiator is used to tune the volume and driver for better low frequency performance, eliminating port turbulence and reducing motion compression.
The MS-AB206 features a 4 channel, Class-D amplifier for efficient and high output. Two channels are dedicated to the subwoofer with the other two channels specifically tuned to provide power to the MS-BX3020 cabin speakers.
This product is rated True-Marine, for dry area installation only, and carries with it a 3 year limited consumer warranty.
Features
350 Watt peak power (210 Watts + 140 Watts speaker output)
Acoustically optimized to produce remarkable sound quality when paired with MS-BX3020 cabin speakers
Built-in 4 channel, Class-D amplifier for efficient yet high output
6” dual voice coil down-firing woofer acoustically coupled to the matching passive radiator for exceptional bass reproduction
Full wiring kit included for ease of installation
Rated True-Marine with a 3 year limited Consumer Warranty for dry area installation only
Specifications
Frequency Response | 25 Hz - 200 Hz |
Low Pass Filter (off) | Fixed for use with MS-BX3020 |
Fuse | 15 A |
Rated Amplifier Power | 26 Watts RMS per channel @ 4 Ohms |
Rated Amplifier Power | 43 Watts RMS per channel @ 2 Ohms |
Peak Power | 350 Watts Total (210 Watts + 140 Watts Speaker Output) |
Woofer Size | 6" Down Firing + 6" Passive Radiator |
Fusion Boxed Speaker 3"
The FUSION MS-BX3020 features a 3" mid speaker, with a waterproof paper cone and a fluid cooled fabric dome tweeter. These speakers are coinstalled above the companionway doors facing fwd, forming a surround sound saloon speaker arrangement.
For those who enjoy the finer things in life, the MS-BX3020 Signature Series Cabin speakers are in a class of their own. For the best possible acoustic experience, FUSION recommends pairing the MS-BX3020 with the MS-AB206 Signature Series Active Subwoofer. The Class-D amplifier input is tuned specifically for the MS-BX3020 speakers, creating a truly unbeatable home theatre experience on the water.
Features
Compact optimized acoustic chamber – Acoustically optimized to deliver home theatre-quality entertainment in your home away from home, the internally shaped acoustic chamber reduces reflective effects for superb sound quality.
Sophisticated internal crossover network – The MS-BX3020 speakers feature a sophisticated internal crossover network and high quality cone construction with added low frequency protection to avoid damage.
Waterproof paper cone – Features a waterproof paper cone for high efficiency and the best presentation of sound, making the MS-BX3020 perfect for the marine cabin environment.
Fabric Dome Tweeters – The magnetic fluid cooled fabric dome tweeter includes resonance control to consistently produce premium, clear audio in the cabin environment.
Installation Kit Included – Everything needed to connect your MS-BX3020 speakers is included in the box.
These Signature Series Cabin Speakers are covered by a True-Marine™ 3 year limited consumer warranty for indoor installation.
Specifications
Peak Power Rating | 100 Watts | |
RMS Power Rating | 26 Watts | |
Efficiency (1W/1M) | 85dB | |
Frequency Response | 200Hz - 20kHz | |
Impedance | 4 Ohms | |
Enclosure Type | Sealed ABS | |
Cone Material | Waterproof Paper | |
Mounting | Adjustable wall bracket supplied | |
Woofer Size | 3 Inch | |
Tweeter Type | Fabric Dome | |
Length | 164mm (6-15/32") | |
Width | 90mm (3-17/32") | |
Depth | 112mm (4-13/32") |
AM/FM/BLUETOOTH (FUSION 770 SERIES) AND 4 X SPEAKERS Part Number 1260-16-02
Sources: AM / FM / Wi-Fi Audio Streaming / Apple AirPlay 2 / UPnP / Bluetooth / Optical Audio In / USB / AUX x 2 / iPhone / iPod / MTP / DAB+ Ready (Requires MS-DAB100A) / SiriusXM-Ready (Requires SiriusXM Connect Vehicle Tuner)
The world’s first touchscreen marine stereo with Apple AirPlay 2 and built-in Wi-Fi, the Apollo RA770 has redefined audio excellence with revolutionary technology and innovative design including Fusion’s Digital Signal Processing, enhanced PartyBus-Network capabilities, over-the-air software updates, a one-piece glass display and more source options than ever before, including advanced SiriusXM features. From the kick drum to the eardrum, Apollo has made it inherently simple to customize your audio entertainment for superior sound quality in any area of your boat. The future of marine audio entertainment has arrived.
Update: Now with new intuitive user experience!
Features:
Industry-First Marine Stereo With Apple AirPlay 2: With the Apollo Series you can stream high quality audio seamlessly via Apple AirPlay 2 over Wi-Fi from your compatible Apple device to the Apollo RA770. Apple AirPlay 2 has the added functionality of being able to seamlessly stream one audio source from your compatible Apple device to multiple Apollo Series marine stereos connected to the same network, with individual and global volume control of the head units. Note: Software update v3.00.83 is required. AirPlay 2 is not supported over PartyBus-Network.
World’s First Marine Wi-Fi Stereo: High quality audio streaming is now available via Wi-Fi, delivering a higher data transfer rate in comparison with Bluetooth. Enjoy perfectly synced music throughout your vessel by wirelessly connecting multiple Apollo stereos via a PartyBus-Network.
Digital Signal Processing (DSP): A technically superior listening experience made simple, Fusion DSP produces superior sound quality in every environment. Precisely calculated loudness curves optimized for the human ear ensure quality, full range audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, at any volume level, a thing of the past. Using environmental information and customized Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season.
Setting up your DSP profiles is made simple with the free Fusion-Link app, or with a custom-made Fusion-Link PC app for OEM boat builders. With just a few clicks, you can set up the preconfigured DSP profile once and get back to enjoying what you love on the water, while listening to high quality audio customized for your ears and the environment.
PartyBus™-Network: Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, making control of your audio and sources a seamless experience. Key functionalities include:
- Stereo Grouping, allows you to link up multiple Apollo Series stereos connected to the same network and play the same audio source synchronized across all stereos. Multiple groups can be created for a personalized audio entertainment experience. Note: Apollo SRX400 sources are not shared on the network.
- Volume Control, scroll through available zones on your vessel and enjoy independent volume control to customize your listening experience, or select ALL volume to adjust a group of stereos at once.
- Power Options, allows you to turn on any connected Apollo Series stereo on the PartyBus-Network remotely from another Apollo Series stereo.
- Home Zone, is the physical zone on board your vessel where the stereo is installed. After adjusting audio in another zone, the stereo will default back to audio control of the Home Zone after a period of inactivity.
Note: User experience may be subject to change without notice when new software version is released.
Glass Touchscreen Display: The future of marine audio entertainment has arrived in the Apollo RA770 with its 4.3” LCD color touchscreen display. Simply tap the screen to pause and play, or swipe through your playlist to your favorite song – fiddling around to locate the right button is now a thing of the past.
Over-The-Air Software Updates: The Apollo Series is intelligently simple and always up to date, thanks to the over-the-air software updates available over Wi-Fi from your smartphone or compatible device via the free Fusion-Link app.
More Source Options Than Ever Before: The Apollo RA770 features more source options than ever before, with Bluetooth, UPnP, Optical Audio, advanced SiriusXM features and DAB+ radio available, AM/FM radio, AUX and USB connections ready at your fingertips.
Advanced SiriusXM Features (USA only): Along with the addition of on-screen album art, a selection of advanced features are now available on SiriusXM! These features are:
- Instant Replay, where you can replay songs from up to 1 hour past playing, making sure you never have to miss another beat of your favorite tunes.
- TuneStart, where you will always hear the song playing on each of your favorite stations from the start, no matter how far along it is when you change the channel.
- TuneMix, where you can create your own channel from a mix of your favorites to create your very own custom channel. TuneMix also gives you the ability to skip songs back to the last hour you have been listening across all channels in your mix.
- SportsFlash, where you’ll receive key plays and updates from your favorite teams during live games, ensuring you never have to miss the best moments.
- Artist, Song and Game Alerts, where you can choose to receive alerts whenever your favorite artists, songs or sports teams start playing.
Note: A SiriusXM Connect vehicle tuner and subscription are required to access SiriusXM satellite radio (available in USA only). DAB+ radio requires the addition of an MS-DAB100A module (sold separately).
True-Marine™ Designed and Engineered: Built on Fusion’s True-Marine design philosophy, the Apollo RA770 has an impressive IPX6 and IPX7 rated water resistant front panel, and has been tested to a high level for protection against salt fog, temperature, vibration and UV.
Fusion-Link™: The industry standard protocol for on-water audio integration and control, Fusion-Link enables control of your entertainment directly from partnered marine Multi-Function Displays, compatible Apple or Android devices via the Fusion-Link app, and Garmin watches via Fusion-Link Lite. With multiple control options, no matter what you are doing on your boat, you can always be in control of your audio entertainment.
Multi-Zone Technology™: Four independent audio zones are available for a customized listening experience across your vessel, each with advanced localized menu controls including volume limits, zone naming, disabling zones and more. Note: Subwoofer and full range line outs require additional amplification.
AirPlay and Apple are trademarks of Apple Inc., registered in the U.S. and other countries. Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc.
FUSION 770 SERIES STEREO WITH 22"WIDE SCREEN LCD HD INC DIGITAL ANTENNA Part Number 1260-16-03
Includes
1 TV Antenna 14" A/B Switch
1 22" LCD 12v TV
2 SM series Fusion 6.5"speaker
1 Stereo Head Unit Fusion 770 series
2 XS series Fusion Speaker 6.5"
Glomex 14" TV Antenna with A/B Switch Amplifier GXV9112/12AB
The Antenna is constructed of UV-resistant nylon for a durable, lifelong appearance. All cables run through the mount (see below for options) for a clean appearance and waterproof installation. The included A/B Switch Amplifier makes converting the TV signal from shoreside service to over-the-air TV (and back) a quick and simple task.
22" LCD TV M series
Majestic Global was the world's first company to develop and produce a 12 Volt LCD TV over 14 years ago. Fast forward the company's growth and technology advances, Majestic remains a global leader in designing specific TV's that can handle the harsh Marine environment and survive the tough outback conditions. The Majestic products are built with the highest possible standard and used by some of the world's best known Boat Manufacturers such as Regal Boats, Rinker Boats, Four Winns, Ranger Tugs and many more. You can be assured the quality and reliability as Majestic covers every product with a 3 Year International Warranty.
The Worlds first 22" Full HD 12 Volt LED TV with built in Global HD Tuner that works in over 150 countries. The New Majestic LED222GS is the latest addition to the range with state of the art engineering from Majestic. The LED222GS is packed with new technology such as built in DVD Player, PVR on DVB-T Signals, Majestic Link, ARC, USB for Multi Media and MMMI for iOS and Android capable devices to give you full HD video interface.
Features:
- Global Solutions TV Tuner
- Low power Consumption
- One Touch Tuning
- Multi Media Display
- Full HD Panel
XS Series 6.5" 200-Watt Classic Marine Speakers
Optimized Full Range Speaker: The XS Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and tweeters to produce quality sound at all volumes.
True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the XS Series carry an IP65 weatherproof rating with a 3-year warranty.
Two Grille Options Supplied: Enjoy the freedom to choose the finish to suit your boat, with both Classic White and Classic Black grilles supplied in the box.
Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the XS Series are designed and built to the highest industry standards for quality and robustness.
SM Series 6.5" speakers
Shallow Basket Design - With a shallow mounting depth of only 24mm [15/16"], the SM Series speakers are ideal for installation where mounting depth is limited.
Tuned, Sealed Enclosure Design - Protects the speakers' components from damage and ensures quality audio reproduction is delivered that normally could not be achieved by a speaker with such a shallow design.
Retrofittable - The SM Series speakers have a circular back with a mounting diameter clearance of 130mm [5-1/8"], allowing it to fit easily into existing 6.5" speaker cutouts.
Aesthetic Interior Design - Designed with aesthetics in mind, the SM Series come with a high-end acoustic fabric grille and feature rounded edges and contour cues to add style to your vessel.
IP65 Weatherproof - The SM Series speakers are rated IP65 for protection against dust and water ingress in the harsh marine environment.
MS-RA770 Apollo Marine Entertainment System With Built-In Wi-Fi
The world’s first touchscreen marine stereo with Apple AirPlay 2 and built-in Wi-Fi, the Apollo RA770 has redefined audio excellence with revolutionary technology and innovative design including Fusion’s Digital Signal Processing, enhanced PartyBus-Network capabilities, over-the-air software updates, a one-piece glass display and more source options than ever before, including advanced SiriusXM features. From the kick drum to the eardrum, Apollo has made it inherently simple to customize your audio entertainment for superior sound quality in any area of your boat. The future of marine audio entertainment has arrived.
UPGRADE TO 32"TV (110V) Part Number 1260-16-04
Upgrades your tv/ stereo system to a 32" Samsung LCD smart screen (NTSC SYSTEM)
** Notes: Option 13839: STEREO/TV/DVD/CD 22"WIDE SCREEN LCD HD ENTERTEAINMENT SYSTEM INC DIGITAL ANTENNA is required for this upgrade.
UPGRADE TO 32"TV (220v) Part Number 1260-16-05
Upgrades your tv/ stereo system to a 32" Samsung LCD smart screen (PAL SYSTEM).
** Notes: Option 13839: STEREO/TV/DVD/CD 22"WIDE SCREEN LCD HD ENTERTEAINMENT SYSTEM INC DIGITAL ANTENNA is required for this upgrade.
CUTLERY KIT Part Number 1260-17-06
8 PLASTIC CERIAL BOWL
8 PLASTIC PLATE
8 KNIFE,FORK,SPOON SET
1 COOKING SPOON
1 SPONGE
1 LARGE COOKING KNIFE
1 SMALL COOKING KNIFE
1 LADLE
1 SPATULA
1 CHOPPING BOARD
1 WHISK
1 KETTLE (STOVETOP TYPE)
1 CAN OPENER
1 FRY PAN MEDIUM
8 PLASTIC CUP
4 COFFEE MUG
1 MEDIUM POT W/LID
1 BIG POT W/LID
4 STEAK KNIFE
1 STRAINER
4 TEA SPOON
1 TONGS
1 SCISSORS FOR KITCHEN
1 TEA TOWEL
1 CORKSCREW/UTILITY KNIFE
8 PLACE MATS
FITTED BEDDING, PILLOW AND BLANKETS Part Number 1260-17-01
Kit Includes
6 X Pillows: 55cm x 65cm
- Color - grey
3 X Fitted sheet
- Color: grey
3 X Flat Sheets
-Color: grey
3 X Blankets: included duvet and duvet cover
- Color: grey
GANGWAY (2.6M CARBON FOLDING W/DECK FITTINGS STANCHIONS) Part Number 1260-17-08
- Extremely light and easy to use.
- Square shape prevents any wrapping on the torsion.
- 0 % corrosion.
- Gangways are processed on full surface.
- Anti slip thread on walking surface.
- Integrated, acid free wheels adjusted for lifting rope.
- Unique, acid free aluminium male deck fitting and hinges.
- Head of gangways is designed not to get in a contact with boat even when moving.
- Easy theft protection.
- High design can be upgraded with customization, unique design, name on gangway, teak surface ...
- V shape of gangway provides simple and thin storage.
- Nominated for elite DAME award, as the most respected and most talked design competition for new marine equipment and accessories in the world.
- Made in EU.
SUNBRELLA BLACK Part Number 12518
SUNBRELLA BLACK 80008-0000
SUNBRELLA CANVAS CADET GREY Part Number 16089
SUNBRELLA CANVAS CADET GREY - 80030-0000
SUNBRELLA CANVAS CAPTAIN NAVY Part Number 13666
SUNBRELLA CANVAS CAPTAIN NAVY - 80046-0000
SUNBRELLA CANVAS ABYSS Part Number 22503
SUNBRELLA CANVAS ABYSS - SJA P058 137
SUNBRELLA CANVAS CHARCOAL Part Number 22015
SUNBRELLA CANVAS CHARCOAL - SJA 3705 137
SUNBRELLA CANVAS MINK BROWN Part Number 22998
SUNBRELLA CANVAS MINK BROWN - SJA 3127 137
SUNBRELLA NATTÉ GRAUMEL CHALK Part Number 20582
SUNBRELLA NATTÉ GRAUMEL CHALK - NAT 10152 140
COOKOUT BBQ Part Number 1260-18-02
The BBQ is installed under a concealed cover in the port aft targa area. Upon opening the cover the BBQ raises into cooking height supported by a custom lift mechanism and supporting gas strut.
Features
- Australian made
- 316 marine grade stainless steel
- Fully electropolished
- Flame failure device
- BBQ Plate: 2304 Duplex – High grade stainless steel (no rust)
- Piezo ignition
- Functional fat drainage system
- Full range of interchangeable accessories to suit your lifestyle
- 2-Year Structural Warranty
- 12-Month Warranty on operating parts
GAS DETECTOR Part Number 1260-18-04
Note
Gas sensors are a consumable item and once triggered may need to be replaced. Your sensore will need to be replaced during the lifetime of your boat and even possibly within the first year of ownership. Keep strong cleaning products and chemicals clear of the sensors as these can trigger an alarm and damage of the sensor.
LPG CHANGEOVER Part Number 1260-18-05
Note
While this option does add simplification in principle it also adds complexity in mooving parts. For a foolproof reliable solution the standard manual changeover is reccomended.
LPG OVEN Part Number 1260-18-06
- Configuration: Wall oven
- Fuel/Power: Propane
- Exterior Cabinet Material: Stainless-steel body, tempered glass door with wooden handle
- Heat Output: Oven: 5100Btu; broiler: 4400Btu
- Oven Size: 0.7cu. ft.
- Oven Door Window: Yes
- Oven Racks Included: Yes
- Broiler: Yes
- Safety Features: Thermocouple protection, electronic ignition
- Overall Size: 21-1/2"H x 17-5/8"W x 17-3/16"D
1) B&G ADDITIONAL 4.5" MULTIFUNCTION DISPLAY Part Number 1260-19-03
Possible Locations
- Port Helm (extra display)
- STBD Helm
- Nav table
Note: this option is an add on to the base B&G navigation pack which must also be optioned (included in base 1600).
1) B&G NAVIGATION PACKAGE WITH 7" PLOTTER, TRIDATA AND AUTOPILOT Part Number 1260-19-09
The base navigation kit for your Seawind provides all the sailing and navigation essentials including 7” plotter, autopilot with 4.1” multifunction display, control and ram and wind speed and depth transducers.
Vulcan 7" Chartplotter B&G:
Easy-to-use
B&G Vulcan has an easy-to-use, intuitive, multi-touch screen. Use the familiar pinch to zoom and swipe to pan actions to explore the many benefits to make your life on the water easier and safer; add waypoints and plan your route with ease.
Dedicated Sailing features for cruising and racing
With B&G’s award-winning sailing functions, you can see all of your key sailing data together on one screen, or overlaid on charts for the modern sailor’s ultimate navigational view. Simply add sailing instruments and sensors to activate B&G SailSteer, which will provide an intuitive graphic display of your Boat Speed, Wind data, Heading, Tide, Wind Shift Sectors and even Laylines. It’s easy to add waypoints or plot a course; and with B&G SailingTime you’ll see waypoint arrival times based on a sailing course and tidal effects, rather than a straight-line calculation.
Simple integration
Get more from your Vulcan by expanding your system via the industry-standard NMEA 2000® network. You can add sailing instruments and sensors, as well as autopilot, Broadband Radar™, ForwardScan™ or SonicHub™ to create a system to suit your needs. Vulcan can be used as a secondary autopilot controller providing easy access to Intelligent Sail Steering, manual and auto steering functions, and Smart Maneuver functionality combined with intuitive menus for ultimate control. B&G Broadband 3G™ or 4G™ Radar integrates with Vulcan to keep watch as you sail, with the ability to identify and track targets from 36 nautical miles away (4G) to right off the bow.
ForwardScan compatible
With the addition of a ForwardScan™ transducer, you can see what lies ahead under the water with approaching depth information. Explore poorly-charted or unfamiliar waters confidently.
Built-in WiFi
Vulcan features built-in Wi-Fi and offers easy access to selected online services, including PredictWind weather forecasts and routing, via marina or smartphone hotspots. Or use the Wi-Fi to mirror the screen of your Vulcan 7 to a compatible smartphone or tablet, for a cost-effective dual-station solution you can take anywhere on board.
- FeaturesEasy to use multi-touch display
- Dedicated sailing features for cruising or racing: SailSteer, SailingTime, RacePanel, Laylines
- Easy to integrate – Connect Vulcan to an existing system and add basic sailing components
- Broadband Radar™ and ForwardScan™ ready
- Integrated Wi-Fi
- Control your B&G Pilot
- Instrument data display
Specifications
Navico 608 Wind Sensor With 20m Cable
608 Wind Sensor With 20m Cable - A high performance NMEA 2000 wind sensor that provides wind angle and speed data. Designed to be used with the B&G Triton and Simrad IS42 multifunction displays. Supplied with mounting hardware and a 20m mast cable with Micro-C connector.
Spar length 435mm
Weight 230g
Triton² Autopilot controller and display pack
This bundle comprises a Triton² Instrument display and a Triton² Pilot keypad to create a fully-featured autopilot controller. Benefit from B&G’s intelligent sail-specific functionality for compass and wind steering, Smart Manoeuvre controls for easy tacking and gybing, and MFD / chart plotter integration for waypoint and route navigation. Take complete control of your autopilot with a simple seven-button keypad, built for safe and reliable operation in all conditions.
- FeaturesOptical Bonding: Sporting an Optically Bonded 4.1-inch LCD display, Triton² allows you to see clearly in all conditions with its large clear colour display 100% free from condensation or fogging.
- Efficient LCD Technology: Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton² exceptionally efficient and extending time available from your battery capacity.
- Easy to Use: Triton² provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display.
- Low Profile Design: At just 8mm thin the Triton² instrument adds a sleek look to any boat.Nearly half the dimension of its thick competitors, Triton² won’t get in the way, catch ropes or offend the eye!
- NMEA 2000® Certified: NMEA 2000 certification means you can be confident when adding Triton2 to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system.
- Easy Installation: A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data.
- The Triton² is simple and quick to install
- Autopilot Integration: Triton² will display B&G Pilot data on a clear status screen.
- With the addition of a Triton² Pilot keypad the instrument becomes a fully functional Pilot controller.
NAC-3 Core Pack
This pack includes all of the core components you need to upgrade your boat with a Simrad Continuum autopilot system – just add a hydraulic pump or mechanical drive unit to suit your steering system, and choose a dedicated autopilot controller or Simrad multifunction display. Designed for rudder-steered vessels greater than 10 metres (35 feet) in length, this pack includes the high-current NAC-3 autopilot computer, RF25N rudder feedback unit, Precision-9 solid-state compass, plus all necessary NMEA 2000® cables and connectors.
- FeaturesCore components for a Simrad Continuum autopilot system – just add a drive unit and controller
- Ideal for boats above 10 metres (35 feet) in length
- Includes the high-current NAC-3 autopilot computer
- Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
- Control with the Simrad AP44 Autopilot Controller, IS42 display and OP12 keypad, or a networked multifunction display
- Includes the RF25N rudder feedback unit
- Includes the Precision-9 solid-state compass for accurate heading data that’s automatically fine-tuned as you travel
- Includes all required NMEA 2000® network connectors and cables
- Easy setup with automatic tuning and compass calibration
- NMEA 0183® input
T1 Pilot Ram - 12v
High power, efficient drive units for maximum power with minimum consumption Ram allows the Power Steer Mode on the Pilot to be used in cas of manual steering failure Integrated hydraulic system: no external hoses, reservoirs etc
- SpecificationsPerformance Maximum thrust (intermittent): 675 kg
- Hard over time nominal RAM-T2: 9 seconds
- Temperature rating: minimum: -20ºc
- Temperature rating maximum: +65ºc
- Relief valve setting: 62 bar
- Back-drive at 12 sec Hard-over: 7kg
- Motor voltage nominal: 12 Volts DC
- Motor power: 100 watt
- Max current: 12 Volt DC 25% duty 22.5 Amp
- Rotation Reversing Protection: IP44
- Connection: 1 meter, (2) Core Flying Lead
- Ignition protection: BS EN 28846:1993
- Coil power continuous: 12 watt
- Connection: DIN 43650
- Recommended oil: Mineral based hydraulic ISO VG10
- Materials:
- Body: Aluminum BS 1490
- Piston rod: Chrome Plated Stainless Steel
- Seals: Nitrile & PTFE
- Body Protection: SP270
Triton 2 4.1” MFD
B&G Triton 2 sailing instruments feature bright, clear 4.1" displays and fully customizable screens in a low-profile mounting. View sailing data, depth, speed, wind and AIS, enjoy excellent viewing angles and award-winning sailing features.
Display Resolution | 800x480 |
Screen Brightness | 1200 nits |
Waterproofrating | IPX 6 and 7 |
Operating Temperature Range | "-15°C to +55°C (5° F to 131° F) |
Storage Temperature Range | "-20°C to +60°C (4°F to 140°F) |
SD Card Storage | 1 Micro SD slot, max. 32GB each. >32 GB format to NTFS |
Ethernet Ports | 1 x 5 pin yellow connector x 1 Mbit. Radar and Sirius (USA only) connectivity only (unless unlocked) |
NMEA 2000 Connectivity | 1 x NMEA 2000 Micro-C port, 1 LEN |
Weight | 1.320 kg (2.91lb) |
Supply Voltage | 10 - 17 V DC |
Warranty | 2 year |
1) B&G V60-B VHF RADIO UPGRADE Part Number 1260-19-10
The V60-B includes a Class B AIS transmitter and receiver, which not only receives AIS targets but also transmits your yacht’s position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbours and waterways. AIS information can be viewed on the radio’s built-in screen, or overlaid on your chart or radar screen through a compatible chartplotter.
Removable Fist Mic
The V60-B’s removable fist mic can be connected to the front or rear of the radio, and optional extension cables allow the mic and radio to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For instance, the V60-B can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below.
Expandable with Wireless Handsets
Add an optional H60 wireless handset to take your radio anywhere on board. Each handset duplicates your radio’s display and controls, enabling remote access to all key functions. Up to two handsets can be connected to a single V60-B, and with multiple handsets connected your radio doubles as an on-board intercom.
Man Overboard (MOB) function
Hold down the NAV/MOB button to drop a waypoint on your current location and the V60-B will enter MOB mode to show you how far away you are and where you need to steer to get back to the position of the MOB event. The MOB waypoint is also transmitted over NMEA 2000 to the rest of your network.
Track up to 5 Buddies!
The Track Buddy feature will automatically requests the position of another VHF radio at set intervals. Simply enter the MMSI of the VHF into your contact list and start tracking! You will be able to see their position in any compatible chartplotter.
- Class D DSC approved VHF radio
- See and be seen with an integrated Class B AIS transceiver
- Integrated GPS receiver
- Removable fist mic supports front or rear connection
- Connect up to two wireless handsets
- Add an optional loudhailer or external speaker
- NMEA 0183® and NMEA 2000® connectivity
- Track up to 5 vessels with the ‘Track Buddy’ feature
- Use Navigation Mode to display speed and course
- Includes Man Overboard (MOB) function
1) NAVIONICS+ CHART - AUSTRALIA AND NEW ZEALAND Part Number 1260-19-25
Get the best-selling boating maps in the world for marine areas and lakes bundled with your new MFD or Chartplotter. Navionics+ is offered with several models and includes: Nautical Chart, SonarChart™, Community Edits and and one year of daily updates and advanced features!
In North America, the Navionics+ bundle includes marine and lake charts on one card, all with SonarChart™ 1ft HD contours, throughout US and Canada, plus a growing list of more than 22,000 inland lakes.
Features
View detailed shorelines with marinas, docks and boat ramp locations.
Increase your awareness of shallow waters and hazardous areas at any depth level including shoals, rocks, wrecks and more.
Target underwater structure to find the best fishing locations: roadbeds, foundations, bridges, brush piles, culverts and creek channels.
Consult tides and currents to plan your boating activities.
1) NAVIONICS+ CHART - CENTRAL AND WEST EUROPE Part Number 1260-19-29
Get the best-selling boating maps in the world for marine areas and lakes bundled with your new MFD or Chartplotter. Navionics+ is offered with several models and includes: Nautical Chart, SonarChart™, Community Edits and and one year of daily updates and advanced features!
In North America, the Navionics+ bundle includes marine and lake charts on one card, all with SonarChart™ 1ft HD contours, throughout US and Canada, plus a growing list of more than 22,000 inland lakes.
Features
View detailed shorelines with marinas, docks and boat ramp locations.
Increase your awareness of shallow waters and hazardous areas at any depth level including shoals, rocks, wrecks and more.
Target underwater structure to find the best fishing locations: roadbeds, foundations, bridges, brush piles, culverts and creek channels.
Consult tides and currents to plan your boating activities.
1) NAVIONICS+ CHART - INDIAN OCEAN AND SOUTH CHINA SEA Part Number 1260-19-26
Get the best-selling boating maps in the world for marine areas and lakes bundled with your new MFD or Chartplotter. Navionics+ is offered with several models and includes: Nautical Chart, SonarChart™, Community Edits and and one year of daily updates and advanced features!
In North America, the Navionics+ bundle includes marine and lake charts on one card, all with SonarChart™ 1ft HD contours, throughout US and Canada, plus a growing list of more than 22,000 inland lakes.
Features
View detailed shorelines with marinas, docks and boat ramp locations.
Increase your awareness of shallow waters and hazardous areas at any depth level including shoals, rocks, wrecks and more.
Target underwater structure to find the best fishing locations: roadbeds, foundations, bridges, brush piles, culverts and creek channels.
Consult tides and currents to plan your boating activities.
1) NAVIONICS+ CHART - MEDITERRANEAN AND BLACK SEA Part Number 1260-19-28
Get the best-selling boating maps in the world for marine areas and lakes bundled with your new MFD or Chartplotter. Navionics+ is offered with several models and includes: Nautical Chart, SonarChart™, Community Edits and and one year of daily updates and advanced features!
In North America, the Navionics+ bundle includes marine and lake charts on one card, all with SonarChart™ 1ft HD contours, throughout US and Canada, plus a growing list of more than 22,000 inland lakes.
Features
View detailed shorelines with marinas, docks and boat ramp locations.
Increase your awareness of shallow waters and hazardous areas at any depth level including shoals, rocks, wrecks and more.
Target underwater structure to find the best fishing locations: roadbeds, foundations, bridges, brush piles, culverts and creek channels.
Consult tides and currents to plan your boating activities.
1) NAVIONICS+ CHART - US AND CANADA Part Number 1260-19-27
Get the best-selling boating maps in the world for marine areas and lakes bundled with your new MFD or Chartplotter. Navionics+ is offered with several models and includes: Nautical Chart, SonarChart™, Community Edits and and one year of daily updates and advanced features!
In North America, the Navionics+ bundle includes marine and lake charts on one card, all with SonarChart™ 1ft HD contours, throughout US and Canada, plus a growing list of more than 22,000 inland lakes.
Features
View detailed shorelines with marinas, docks and boat ramp locations.
Increase your awareness of shallow waters and hazardous areas at any depth level including shoals, rocks, wrecks and more.
Target underwater structure to find the best fishing locations: roadbeds, foundations, bridges, brush piles, culverts and creek channels.
Consult tides and currents to plan your boating activities.
1) VESPER CORTEX VHF & AIS RADIO UPGRADE (THETHERED & WIRELESS HANDSET) Part Number 1260-19-12
Upgrade to Vespers state of the art VHF system. Package includes Cortex-V1 VHF radio with SOTDMA smartAIS transponder and remote vessel monitoring, H1 Tethered handset and Cortex -H1p wireless handset with charging cradle.
VHF Re-imagined
Advanced multi-station VHF with intuitive touchscreen operation. Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
- Includes M1 hub, tethered H1 handset and accessories
- Built-in Class B SOTDMA with no-loss antenna splitter
- Built-in WiFi and Cellular connectivity on monitoring on board and ashore
- Low power consumption hub
- 10Hz GPS antenna
- 4-inch multi-touch display with gorilla glass for maximum durability
- Single hand operation with click wheel and dedicated buttons
- Wet and glove capable touchscreen
- Optically bonded display for wide-angle and sunlight viewability, even in the harshest midday sun
- 85 dBA of crystal-clear audio
- Combined AIS and VHF display with voiced alerts
- Touch a vessel onscreen for direct calling (DSC)
1) VESPER CORTEX VHF & AIS RADIO UPGRADE (THETHERED HANDSET ONLY) Part Number 1260-19-37
Upgrade to Vespers state of the art VHF system. Package includes Cortex-V1 VHF radio with SOTDMA smartAIS transponder and remote vessel monitoring, H1 Tethered handset.
VHF Re-imagined
Advanced multi-station VHF with intuitive touchscreen operation. Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
- Includes M1 hub, tethered H1 handset and accessories
- Built-in Class B SOTDMA with no-loss antenna splitter
- Built-in WiFi and Cellular connectivity on monitoring on board and ashore
- Low power consumption hub
- 10Hz GPS antenna
- 4-inch multi-touch display with gorilla glass for maximum durability
- Single hand operation with click wheel and dedicated buttons
- Wet and glove capable touchscreen
- Optically bonded display for wide-angle and sunlight viewability, even in the harshest midday sun
- 85 dBA of crystal-clear audio
- Combined AIS and VHF display with voiced alerts
- Touch a vessel onscreen for direct calling (DSC)
2) UPGRADE TO 12" ZEUS3S CHARTPLOTTER Part Number 1260-19-16
The Zeus 3S is the ultimate super-fast sailing chartplotter and navigation system for blue water cruisers and racers. This ultra-bright, wide-angle display combines an all-weather touchscreen with a rotary dial and keypad for ultimate control in all conditions. Easily leverage dedicated, race-proven sailing features such as SailSteer, Laylines, and RacePanel. Connect with online services and mobile devices using built-in Wi-Fi, and integrate seamlessly with a wide range of instruments and accessories for greater safety, performance, and enjoyment on the water.
- Option Navigation package must be selected before choosing this option
2) UPGRADE TO 9" ZEUS3S CHARTPLOTTER Part Number 1260-19-11
The Zeus 3S is the ultimate super-fast sailing chartplotter and navigation system for blue water cruisers and racers. This ultra-bright, wide-angle display combines an all-weather touchscreen with a rotary dial and keypad for ultimate control in all conditions. Easily leverage dedicated, race-proven sailing features such as SailSteer, Laylines, and RacePanel. Connect with online services and mobile devices using built-in Wi-Fi, and integrate seamlessly with a wide range of instruments and accessories for greater safety, performance, and enjoyment on the water.
- Option Navigation package must be selected before choosing this option
3) B&G AUTOPILOT REMOTE Part Number 1260-19-04
Key Features:
Easy to use, simple DIY install
Heading control/dodge in 1° and 10° increments
Dedicated autopilot standby & engage buttons
Quickly toggle autopilot/NoDrift steering
Multicolour status LED with low battery indication
Compact, lightweight remote
Wristband or lanyard attachment
Up to 30m range
Waterproof base station, deck or pole mount
NMEA 2000® connection (Micro-C)
3) B&G HALO20+ RADAR Part Number 1260-19-18
See Far And Near With One Compact Dome
Perfect for a wide mid-sized to large sailboats, HALO20+ comes in a compact 20-inch dome antenna and delivers high-quality short, mid and long-range detection. Monitor two distance ranges at once in Dual Range mode so you can keep an eye on far away weather cells while watching for collision hazards up close. HALO20+ radar’s pulse compression technology means no compromises in detection at either selected range, while beam sharpening provides enhanced separation between small or distant targets.
The Best View To Avoid Collision
HALO20+ radar does a full 360 degree sweep every second, thanks to its industry-first 60 RPM rotation at ranges up to 1.5 nautical miles. These ultra-fast updates give you an almost real-time view at close range, offering the ultimate view for collision avoidance of fast moving targets.
Built-in VelocityTrack™ Doppler Technology
VelocityTrack™ technology grands instant visual feedback on whether targets are coming towards you or moving away with colour-coding approaching vessels for high visibility while de-emphasizing diverging targets, increasing situational awareness and decreasing the risk of collision. HALO20+ radar automatically checks every target in range; there’s no need to manually select individual targets, and no limit to the number of targets on screen at one time.
Ready Whenever You Are
HALO20+ Radar wakes instantly from its low-power standby mode, delivering this high-speed radar coverage exactly where and when you require it. Even if your HALO20+ Radar is completely powered down, start-up only takes some seconds, not minutes like traditional pulse radar.
Easy to Use Radar
Harbour, offshore, weather and custom modes tune HALO20+ Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions.
- 36 nm range from a compact 20-inch dome
- Advanced pulse compression technology with beam sharpening
- Simultaneous Dual Range operation sees both far and near
- Ultra-fast 60 RPM operation at ranges up to 1.5 nm
- VelocityTrack™ Doppler technology to avoid collision
- Easy operation with harbour, offshore, weather and custom modes
- MARPA target tracking (up to 10 targets, 20 in dual range)
- Ready instantly from standby
- Low power consumption
Approvals
Compliance | FCC, Part 47 CFR 80 and 90: RED, Article 3 of Directive 99/5/EC: CE: EN, EN302-248 V2.1.1: Industry Canada, RSS238: RCM (C-Tick): IEC60945 Sec 9.2,9.3, 10.3-10.9, 11.2: IEC60950 Electrical Safety |
---|
Electrical
Power Consumption, max. | 29W |
---|---|
Power Consumption, typical | 20W |
Recommended Fuse Rating | 5A |
Supply Voltage | 10.5 - 31.2 VDC (12/24V systems) |
Humidity | 95% RH at 35°C (95°F) |
Environment
Operating Temperature Range | -25° to + 55°C (-13° to +130°F) |
---|---|
Waterproof rating | IPX6 |
MFD
Dimensions (Diameter x H) | 510mm (20") |
---|
Physical
Dimensions (W x H x D) | 510mm dia x 223 mm H. (20" dia x 8.8" H) |
---|---|
Weight | 5.9 kg (13 lbs) without cable |
Radar
Beam width | 4.9° H nominal (-3dB) 2.5° with target separation on high x 25° V |
---|---|
Max Range, scale | 36 NM |
Max Operating Wind Speed | 100 knots (51 m/s) |
Min Range, scale | 50 m / 200 ft / 50 yd |
Radar Modes | Harbour, Offshore, Weather, Bird, Dual Range, North Up, Course Up, Relative motion, True Motion |
Radar Technology | Pulse Compression |
Rotation speed | Up to 60 RPM (Range Dependent) |
Other
Warranty Period | 2 Years |
---|---|
Interface | B&G MFD |
3) B&G VHF WIRELESS HANDSET AT HELM Part Number 1260-19-06
Wireless Control of your Fixed-Mount VHF
The H60 handset offers remote control of your fixed-mount V60 VHF radio. Make calls, scroll through channels, and quickly initiate DSC distress functions from anywhere on board. With the H60, you have the maximum transmission power and features of your fixed-mount VHF radio, with the convenience and portability of a handheld.
Communicate Anywhere On Board
With a range of up to 100 metres, the H60 offers complete coverage aboard even the largest yachts. One or more H60 handsets and the V60 base station can also be used together as an on-board intercom system, enabling clear communication between crew members vessel-wide.
Designed for Real-World Conditions
The H60 handset is rated IPX7 waterproof and uses an inductive charging system—meaning no exposed power connectors—for maximum protection from the elements. A full charge provides up to 8 hours of use, giving you total freedom to move around your yacht.
Minimum product requirements
Requires a B&G V60 VHF radio. Each radio supports a maximum of two wireless handsets.
3) HF ICOM RADIO Part Number 1260-19-20
Industry standard 110mm x 220mm size remote controller
The IC-M801E features a remote head measuring only 220mm wide, 110mm high and 84.4mm deep. The 'black box' main body of the transceiver mounts out of the way and out of sight. 12-volt wires hook up directly to the transceiver black box. The same black box also hooks into a GPS, laptop computer, and e-mail modem. There's an accessory socket for an external speaker mountable independently of the remote head. There are automatic antenna tuner connections for the remote Icom automatic antenna coupler.
Large backlit, dot-matrix LCD display with 10 selectable lighting levels
The IC-M801E front panel sports a full keypad, allowing direct frequency entry. The large dot-matrix display offers 10 levels of backlighting and is easy to see, day or night. Large dials and buttons allow for easy operation in rough seas. Icom have included a headphone socket on the front panel, allowing the operator to operate the radio without disturbing others.
Digital signal processing
The DSP controlled digital IF filter provides flexible filter settings for narrow band signals like SITOR and FSK without having to install an optional narrow filter.
12V power supply available
The IC-M801E has a built in DC-DC power converter, which provides 1.6V DC from 12V DC.
Automatic antenna tuner, AT-141
An optional automatic tuner, AT-141 easily connects to the IC-M801E. If the tuner cannot tune the antenna, the IC-M801E bypasses the tuner and displays an alert on the display.
125W (PEP) of output power
A stable 125W of output power can provide reliable long distance communication. The large cooling fan ensures stable internal temperature even during high duty operation.
Standard Accessories
Supplied accessories include separation cable, HS-98 telephone handset, SP-24 external speaker, mounting bracket kits, DC Power cables, ACC plugs and spare fuses.
1195 channels
The IC-M801E is pre-programmed with 1035 international and domestic channels, plus 160 user-programmable favourite frequency channels that can be programmed into the radio by an authorised Icom dealer.
Features:
- Email capable, (laptop, radio modem and email service provider are required)
- 2-step power saver function
- 0.5-29.999MHz continuous receiver coverage
- D-SUB connector for NBDP/FSK terminal
- GPS connector
- RS-232C/NMEQA connector
- Printer controller
Specifications:
- Digital Signal Processing (DSP) virtually eliminates noise and interference.
- Industry standard 110mm x 220mm size remote controller.
- Separate external speaker allows you to place the sound where it’s needed most.
- 125 watts of power, 100% duty cycle.
- 1195 channels.
- 160 user programmable memory channels.
- Large backlit, dot-matrix LCD display with 10 selectable lighting levels.
- Large, tactile knobs, easy to use in rough marine conditions.
- Backlit keypad, eliminating guesswork when operating in a dark cabin.
- New automatic antenna tuner AT-141 matches the transceiver to a long wire antenna with little insertion loss.
- Pass-through tuning automatically tunes for reception.
3) SATELITE PHONE/DATA WIFI ROUTER IRIDIUM GO Part Number 1260-19-21
The Iridium GO! is a satellite wifi router/phone. Once installed in the boat the boat will have a wifi hotspot the same as any office/home and all devices (phones, computers, chartplotters, c-zone etc) can then easily be connected to the internet. The unit is made by Iridium and the service provider is a company called PredictWind, which also supply the Iridium GO! kit with all parts needed including a pre-activated SIM card. Once the system has been installed into a boat and the SIM card inserted, the customer can then go to https://satellite.predictwind.com/dashboard/activate/confirm?type=sim and fill in the form to set up his/her credit card for monthly billing.
This option includes a professional package subscription with access to a large range of weather (and other) forecasting services which can be viewed on B&G chart plotters, tablets, computers etc. After the first year subscription has expired the owner can then choose to continue paying the annual subscription charges for the Professional Package weather forecasting services or they can select a different subscription package (including a free tier option). The weather package subscriptions offered by PredictWind are value added services, additional to the monthly satellite data package.
B&G FORWARD SCAN OPTION Part Number 1260-19-17
Look ahead with ForwardScan®
ForwardScan® is a powerful defence against running around, and an invaluable tool for locating secure sites to drop anchor.
The ForwardScan® transducer operates at 180 kHz to reduce interference from traditional 200 kHz echosounders, and provides:
• Maximum forward view of 8X your current depth e.g. at 3 m (10 ft) depth, see up to 24 m (80 ft) ahead.
• Nominal forward view of 4-5X your current depth e.g. At 3 m (10 ft) depth, see 12-15 m (40-50 ft) ahead.
Bottom Colour Tracking
Bottom Colour Tracking offers a solid 2D rendering of the bottom ahead of your vessel for an uncluttered, immediately understandable view. Make fast and well-informed navigational decisions, without needing to interpret the individual data points returned by the echosounder.
Heading Line View
Heading Line View integrates ForwardScan® depth data with the heading line displayed on the navigation page of your B&G multifunction display. The line is colour-coded in segments to represent deep, medium, and shallow water, with customisable depth ranges to suit your boat’s draught.
ForwardScan’s forward range scale is automatically synchronised with the length of the heading line: in split-screen ForwardScan®/Navigation view, the full distance from your vessel to the end of the heading line is represented in 2D on the ForwardScan® display. Quickly reconcile ForwardScan® data with charted depth and your present course, for a comprehensive understanding of what’s ahead.
WIRELESS ROUTER KIT - ASIA PACIFIC & EUROPE Part Number 1260-19-36
The Peplink MAX Transit Pro is the next generation dual modem mobile router from Peplink. This latest modem Transit features WIFI 6, remote sim capabilities, Docker, upgraded memory and the faster Transit processor yet making it ideal for combining multiple high speed internet connections including Starlink and multiple LTE/5G devices. The Transit Pro has 2 onboard LTE-A cellular modems onboard. Two Category-12 modem are embedded.
· Simultaneous Dual-Band (2.4GHz / 5GHz), Wi-Fi 6, 2x2 MIMO, Wi-Fi WAN and/or AP
· 1x WAN Port, 1 x LAN Port, 2x CAT-12 Embedded Cellular Modems with Redundant SIM Slots
· 1 Gbps Router Throughput
· Cellular Data Rate (Downlink/Uplink): CAT-12: 600 Mbps / 150 Mbps
· Power Port: 2x USB-C 20V, 3A each for Power Input; Terminal Block: 12V – 56V DC.
· LTE Bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B21, B25, B26, B28, B29, B30, B32, B38, B39, B40, B41, B66 | 3G Bands: HSPA+: B1, B5, B8.
WIRELESS ROUTER KIT -NORTH AMERICA Part Number 1260-19-97
The Peplink MAX Transit Pro is the next generation dual modem mobile router from Peplink. This latest modem Transit features WIFI 6, remote sim capabilities, Docker, upgraded memory and the faster Transit processor yet making it ideal for combining multiple high speed internet connections including Starlink and multiple LTE/5G devices. The Transit Pro has 2 onboard LTE-A cellular modems onboard. A Category-7 Modem with support for Band-71 and other newer bands as well as a Category-12 modem are embedded. By pairing CAT-7 and CAT-12 this router is optimized for AT&T, T-Mobile & Verizon and is certified by all three carriers.
• Simultaneous Dual-Band (2.4GHz / 5GHz), Wi-Fi 6, 2x2 MIMO, Wi-Fi WAN and/or AP
• 1x WAN Port, 1 x LAN Port, 2x CAT-7 Embedded Cellular Modems with Redundant SIM Slots
• 1 Gbps Router Throughput
• Cellular Data Rate (Downlink/Uplink): CAT-7: 300 Mbps / 150 Mbps
• Power Port: 2x USB-C 20V, 3A each for Power Input; Terminal Block: 12V – 56V DC.
• LTE Bands: B1, B3, B7, B8, B20, B28, B32, B38, B40, B41, B42, B43 | 3G Bands: HSPA+: B1, B5, B8.
DECK WASH FRESHWATER Part Number 1260-21-01
TIP: Washing down your sail hardware, gelcoat surfaces, alluminum and stainless with freshwater after each sail is the best way to prolong a top quality and finish of your equipment.
DECK WASH SALT WATER Part Number 1260-21-02
DECK WASH SALT WATER WITH GALLEY SPIGOT Part Number 1260-21-03
Note
This option comes in handy when raising the anchor in muddy anchorages.
ELECTRIC TOILET XL QUITE FLUSH UPGRADE (2) Part Number 1260-21-04
This option upgrades both heads to electric quiet flush. Quiet flush heads feature a separate macerator and flush pump allowing a quieter flush cycle than traditional electric toilets. This toilet include a single button flush actuator with a dual-function water level control switch and incorporates a powerful waste water evacuation pump with built-in macerator. One of the main denefits of this toilet is the ability to dry bowl after flushing.
Tip: when leaving the boat for more than a few days, fill the bowl with fresh water using the shower head and then dry flush. This will pump fresh water through the toilet system preventing odor build up.
- Key Features:
- Quiet flush
- Single button flush actuator, with dual-function water level control switch
- High-capacity waste macerator and waste discharge pump
- Compact or household size available
- Salt water flush
- SpecificationsType: Electric
- Material: White vitreous china bowl; Baked enamel seat & cover
- Dimensions: 13 3/4"H x 14"W x 17 1/2"D
- Draw: 10A @12V DC, 5A @ 24V DC
- Water Consumption: 1-2 Quarts (Litres) per Flush
FRESH WATER HANDHELD BIDET SPRAYER (1) Part Number 1260-21-13
Mounted on a hose close to the toilet, “The Bum Gun” has the added benefit of reducing toilet paper waste, is useful for toilet cleaning and enables the easy flushing of fresh water through salt water toilets when leaving the boat unattended for longer periods.
Marine toilet odor is often the result of stagnant salt water in the system which then calcifies on the internal walls of the sanitary hose. It is therefore always advisable to flush a salt water toilet with freshwater when not in daily use to reduce this effect.
GALLEY CHARCOAL FILTER WITH SPIGOT Part Number 1260-21-05
Features
- Silverised carbon filter - removes nasty tastes and smells
- Replace each season or 4500litres (1188 US gal)
- Note - this is not a bacterial filter
GREY WATER SYSTEM Part Number 1260-21-06
Note
Most areas do not require grey water, so check with your deler before optioning.
Note
This option is required for Australian survey boats opperating in Sydney Harbour and Moreton Bay.
SALTWATER DECKWASH ADDITIONAL OUTLET IN IN COCKPIT (FOR FISH CLEANING) Part Number 1260-21-07
Note: This option first requires the DECK WASH SALT WATER #13084 or DECK WASH SALT WATER WITH GALLEY SPIGOT #13106 to be installed.
TRANSOM SHOWER (COLD) Part Number 1260-21-08
The award winning Whale Twist deck shower is a radical innovation in deck showers. The Twist puts control in your hands with it's unique handset incorporating temperature and flow control in a single easy to use unit. A Radical Innovation in Deck Showers -Putting control in your hands.
Unique Integrated Handset
Incorporates shower temperature and flow controls
Easy to use-streamlined ergonomic design
High quality UV resistant ASA materials
No Lids or Covers
Deck Protect™ End Cap creates a splash-proof seal
TRANSOM SHOWER (HOT & COLD) Part Number 1260-21-09
The award winning Whale Twist deck shower is a radical innovation in deck showers. The Twist puts control in your hands with it's unique handset incorporating temperature and flow control in a single easy to use unit. A Radical Innovation in Deck Showers -Putting control in your hands.
Unique Integrated Handset
Incorporates shower temperature and flow controls
Easy to use-streamlined ergonomic design
High quality UV resistant ASA materials
No Lids or Covers
Deck Protect™ End Cap creates a splash-proof seal

WATERMAKER (SPECTRA VENTURA INC Z-ION UNIT) Part Number 1260-21-10
The Spectra Ventura 150c (24l /h) is engineered for the smaller vessel to be energy-efficient and lightweight. These watermakers are composed of compact modules, making for easy installation in confined spaces. The Ventura 150c operates anywhere in the world and delivers over 6 gallons (24 liters) of fresh drinking water an hour. The Ventura 150c features the new Spectra Connect controller, which allows you to operate and monitor your watermaker from the nav desk. Spectra Connect also has new added features like the Fill Tank mode, or a customizable Auto Run mode, One-TouchSensor Calibration, and suggested maintenance intervals displayed on the dashboard.
The Z-ION system introduces a stream of metallic ions that kill the organisms in a watermaker. While treated with the metallic ions, a system will be kept ready to operate without any additonal flushing, external power sources, pickling chemicals, or complex procedures. The whole operaton is completely automatc, controlled by the Z-ION circuit.
0.9kg FIRE EXTINGUISHER STORAGE BOX INSTALLATION Part Number 1260-23-02
*Fire extingueshers are not included
CARLEY FLOAT 10PAX Part Number 1260-23-04
Simply by casting it over the side, the lightweight Carley float can be launched more rapidly than traditional rigid lifeboat designs, and without the need for specialised hoists. Unlike rubber inflatable rafts, it is relatively immune to compromise of its buoyant chambers.Seafarers in it however are completely exposed to the elements.
The Carley float is an Australian survey approved floatation device and is a cost effective means to protect passangers when chartering within partially smooth waters.
NOTE:
For coastal or offshore Australian survey boats a life raft will be required to the max passenger capacity.
DINGHY HIGHFIELD CL340BLT- HYPALON Part Number 1260-23-05
The hulls of the Classics are built of 2.5mm thick powder coated marine grade aluminium. The tubes are made of ORCA® Hypalon tube fabric.Hypalon offers owners an extended tube life due to the added durability and UV resistance of the fabric. Hypalon is the material of choice for cruisers and is reccomended by Seawind.
NOTE
3.4m is the perfect size for most of the Seawind Range below the Seawind 1600 in size. It's light enough to be pushed up the beach by 1-2 people but big enough to provide comfort and security. This is also a popular size for charter boats and is suitable for Australian Bareboat Charter. 3 persons with some luggage, or 4 persons without, are generally a comfortable fit aboard a CL340 (although technically the boat can carry up to 6).
STANDARD FEATURES
ORCA® Hypalon tube fabric
Welded seams
Flush mount non-return valves
High tensile chromated & powder coated aluminum hull
Lockable bow locker (fit 24L fuel tank)
Self-draining deck
Integrated transom supports
Removable seat
Lifting points and towing eyes
Tow bridle points
Anti-slip deck
Heavy duty rubbing strake
Full length keel guard
Tank strap kit
Under seat bag
Highfield dry bag
Foot pump, oars, repair kit
SPECIFICATIONS
Overall Length | 3.40 m | 11' 2" |
Internal Length | 2.48 m | 8' 2" |
Overall Width | 1.73 m | 5' 8" |
Internal Width | 0.79 m | 2' 7" |
Dead Rise | 15° | |
Tube Diameter | 44 cm | 17" |
Number of Air Chambers | 3 | |
Maximum Load | 551 kg | 1215 lb |
Maximum People | 6 | |
Boat Only Weight | 70 kg | 154 lb |
Recommended Power | 15 hp | |
Maximum Power | 25 hp | |
Engine Shaft | S | |
Design Category | C |
DINGHY HIGHFIELD CL380BLT- HYPALON Part Number 1260-23-06
Extra level of comfort for this 3.8m double deck hulled dinghy that will keep your feet dry.The high quality finish and luxury look belies the fact that this range of tenders has been designed to work hard. A durable aluminium hull coupled with full length keel guards make these ideal for those beach-hopping days with friends and family.
The large weight savings achieved compared to equivalent GRP tenders means you’ll enjoy impressive performance with smaller engines, and with excellent payload capacities, the Classic range really does offer a tender for everyone.
The hulls of the Classic 380 is built of 3mm thick powder coated marine grade aluminium. The tubes are made of ORCA® Hypalon tube fabric.Hypalon offers owners an extended tube life due to the added durability and UV resistance of the fabric. Hypalon is the material of choice for cruisers and is reccomended by Seawind.
NOTE:
3.8m is the largest tender reccomended for the Seawind 1260.
STANDARD FEATURES:
ORCA® Hypalon tube fabric
Welded seams
Flush mount non-return valves
High tensile chromated & powder coated aluminum hull
Lockable bow locker (fit 24L fuel tank)
Self-draining deck
Integrated transom supports
Removable seat
Lifting points and towing eyes
Tow bridle points
Anti-slip deck
Heavy duty rubbing strake
Full length keel guard
Tank strap kit
Under seat bag
Highfield dry bag
Foot pump, oars, repair kit
Overall Length | 3.80 m | 12' 6" |
Internal Length | 2.88 m | 9' 5" |
Overall Width | 1.73 m | 5' 8" |
Internal Width | 0.79 m | 2' 7" |
Dead Rise | 15° | |
Tube Diameter | 44 cm | 17" |
Number of Air Chambers | 3 | |
Maximum Load | 637 kg | 1404 lb |
Maximum People | 7 | |
Boat Only Weight | 82 kg | 181 lb |
Recommended Power | 20 hp | |
Maximum Power | 30 hp | |
Engine Shaft | S | |
Design Category | C |
DINGHY MOTOR CRANE Part Number 1260-23-07
NOTE:
Requires 4x 200w solar option and dinghy outboard bracket.
DINGHY OUTBOARD BRACKET Part Number 1260-23-08
DINGHY WHEELS Part Number 1260-23-09
The dinghy wheels allow the user to easily drag the tender on smooth flat ground single handed, making light work of moving the dinghy. The wheels are made from robust ABS plastic with a 316 stainless steel axle and spring. the wheels have 3 adjustment positions and are easily fitted to the transom with the provided fitting kit.
NOTE:
Requires dinghy option
DROGUE ATTACHEMENT POINTS Part Number 1260-23-10
JORDAN SERIES DROGUE Part Number 1260-23-12
LIFERAFT - 12 MAN FULLY INSTALLED ON DECK Part Number 1260-23-13
LALIZAS ISO ATLANTIC L Life raft <24h is ideal for offshore sailing with limited survival equipment. Certified according to ISO 9650-1 A testing standard. ISO 9650-1 defines liferafts designed for long voyages or cruises when gusts of wind can be expected, together with exceptional wave height (excluding abnormal conditions such as hurricanes). Each liferaft contains thermal floor, internal & external light, pop-up tent and 4 stabilising pockets.
Equipment
1. Sea anchor with rope (1 piece)
2. Life ring with rope (1 piece)
3. Floating paddles (2 pieces)
4. Immediate action (1 piece)
5. Floating knife (1 piece)
6. Canopy support (2 pieces)
7. Bailer (1 piece)
8. Sponge (2 pieces)
9. Whistle (1 piece)
10. Repair kit (1 piece)
11. Manual pump (1 piece)
12. User internal manual (1 piece)
13. Seasickness bag (12 pieces)
14. Torch kit (1 piece)
15. Red hand flares (3 pieces)
16. Red parachute flares (2 pieces)
17. Signaling mirror (1 piece)
18. Anti-seasickness pills (6 per person)
LIFERAFT - 4 MAN IN VALISE Part Number 1260-23-14
Each chamber is capable of fully supporting the raft with its maximum number of occupants. The ISO RAFT is manufactured and tested according to ISO 9650-1 standard for Safety, and offers highly visible, stable, sheltered conditions for the occupants and is packed in a waterproof valise.
12 YEARS GUARANTEE
LALIZAS ISO-RAFTS carry a fully transferable 12 year fabric and seam guarantee. This is your assurance of their commitment to quality and complete customer satisfaction. This guarantee applies under certain conditions to all ISO life rafts, provided they are inspected by an authorized Lalizas service station. The first inspection of the liferaft should be 2 years after installation or 3 years within manufacturing date.
LIFERAFT - 8 MAN FULLY INSTALLED ON DECK Part Number 1260-23-15
LALIZAS ISO ATLANTIC L Life raft <24h is ideal for offshore sailing with limited survival equipment. Certified according to ISO 9650-1 A testing standard. ISO 9650-1 defines liferafts designed for long voyages or cruises when gusts of wind can be expected, together with exceptional wave height (excluding abnormal conditions such as hurricanes). Each liferaft contains thermal floor, internal & external light, pop-up tent and 4 stabilising pockets.
Equipment
1. Sea anchor with rope (1 piece)
2. Life ring with rope (1 piece)
3. Floating paddles (2 pieces)
4. Immediate action (1 piece)
5. Floating knife (1 piece)
6. Canopy support (2 pieces)
7. Bailer (1 piece)
8. Sponge (2 pieces)
9. Whistle (1 piece)
10. Repair kit (1 piece)
11. Manual pump (1 piece)
12. User internal manual (1 piece)
13. Seasickness bag (12 pieces)
14. Torch kit (1 piece)
15. Red hand flares (3 pieces)
16. Red parachute flares (2 pieces)
17. Signaling mirror (1 piece)
18. Anti-seasickness pills (6 per person)
SAFETY KIT 8 PERSONS Part Number 1260-23-16
This safety kit is designed for 8 people and is an essential option for all sailors. Most registration bodies will require these items be fitted or onboard and will be looked for during any on water inspections by local authorities.
CONTENTS
1 First Aid Kit - Cat G
8 Whistle Pealess
1 Fire Blanket
1 Fog Horn - Ecoblast/Air Cannister
1 V-Sheet 1.83m x 1.22m
8 Life jacket - Coastal 150N
3 Fire Extinguisher 0.9kg
3 Fire Extinguisher box 0.9kg
1 Flare kit (2 red & 2 orange)
NOTE
This safety kit is required for all owners taking Vietnam handover.
BOWSPRIT & DECK HARDWARE KIT Part Number 1260-24-02
The bowsprit is retractable, allowing for fast retraction for sail attachment ot berthing limitations.
BOWSPRIT & SCREECHER DECK FITTING KIT - CARBON FIBER Part Number 1260-24-03
The bowsprit is retractable, allowing for fast retraction for sail attachment ot berthing limitations.
GENOA DECK FITTING 1250/1260 KIT Part Number 1260-24-04
Note
This option is not required if the bowsprit option has allready been selected.
JIB CLEW CONTROL SYSTEM Part Number 1260-24-05
MAST BOOM THIRD REEF Part Number 1260-24-06
Note
The standard boat does include 3 reefing points and single line reefing, this option simply adds a 3rd dedicated line and associated hardware preventing the need to access the boom to manually switch from reef 1 to 3.
MAST HEAD WINDEX Part Number 1260-24-07
Length of vane 380mm. Weight 85g.
MAST STEPS AT MAST HEAD Part Number 1260-24-08
MAST STEPS TO SPREADER Part Number 1260-24-09
MPS DECK FITTING KIT Part Number 1260-24-10
SYNTHETIC LIFELINES Part Number 1260-24-11
This option provides a very lightweight lifeline that is immune to corrosion. This option reduces the weight of stainless steel componentry by eliminating the bow and stern rails and heavy stainless 7x19 wire. You can expect to sabve between 30 and 50kg depending on the model. Synthetic lifelines are tensioned with lashings that attach to pad eyes on the bow and transom and pass through stainless stanchions allong the side deck.
The biggest issue with synthetic lifelines is chafe. You need to be mindful of sheets rubbing on them. Chafe from the sheets can be managed by adjusting the sheet leads.
WINCH EVO 50 ELECTRIC UPGRADE (1) Part Number 1260-24-12
Features
Push Button Power
Quiet operation
Manual override
All the benefits of the EVO® range
Easy to install
Inclusive of contactor and motor units
Feature powerful series wound motors
Choice of two levels of control: E Series or Electric Load Sensing (ELS)
E Series controller features a thermal trip. In addition to a thermal trip, the ELS Control Box cuts power when the winch reaches its Working Load Limit (WLL). Power resumes once the load returns below the WLL.
ELS Control Boxes available for Size 40 to 80
CRUISING LAMINATE JIB UPGRADE Part Number 1260-25-01
This Doyle cruising laminate jib upgrade uses DCX Cruising laminate from DIMENSION-POLYANT. The sail offers increased performance, low stretch and enhanced durability over standard dacron. This upgrade offers radial cut construction and incorporates a UV shield to protect the laminate when furled.
DIMENSION-POLYANT cruising laminates were developed to create low stretch, durable, easy to handle furling high tech sails. Two layers of polyester taffeta are laminated on both sides of a film-encapsulated scrim which proved to have excellent warp stretch performance and great tear strength. The rugged taffetas covering the film and scrim are coated with our unique UVM™ finish to improve UV resistance and to reduce the chances for mildew growth.
Note:
The UV strip is color matched to the sail color providing a virtually invisable UV protection for your sail.
CRUISING LAMINATE MAIN UPGRADE Part Number 1260-25-02
This Doyle cruising laminate square top mainsail upgrade uses DCX Cruising laminate from DIMENSION-POLYANT. The sail offers increased performance, low stretch and enhanced durability over standard dacron. This upgrade offers radial cut construction and also modifies the sail shape from high roach to squaretop design which includes an innovative jackline design to enable the head to fold into the bag automatically once the halyard tension is removed.
DIMENSION-POLYANT cruising laminates were developed to create low stretch, durable, easy to handle furling high tech sails. Two layers of polyester taffeta are laminated on both sides of a film-encapsulated scrim which proved to have excellent warp stretch performance and great tear strength. The rugged taffetas covering the film and scrim are coated with our unique UVM™ finish to improve UV resistance and to reduce the chances for mildew growth.
JACK LINE DESIGN
MPS, SOCK & SHEETS Part Number 1260-25-04
Of all the sails developed for the cruising sailor over the past 35-40 years, the multi-purpose spinnaker (or MPS) is a sail that sits atop the “must have” list for anyone sailing outside the confines of their harbor.
The MPS is an asymmetrical spinnaker with the luff longer than the leech. The way these sails are set means the tack of the sail is attached to the boat at all times, via a bridle supported off the two bows. The bridle attachment allows the user to shift the tack from windward to leward as required maxamising the operational wind angle range of the sail. The MPS sail is light, large (115 sqm), powerful, and inexpensive. They take up little room for their size and are easy to set and douse using the provided snuffer.
The MPS is often the difference between motoring home in light to moderate air or being able to sail sometimes at the same speed, or more, as motoring, without the engine noise and fumes and so can make for a fine end to a great day sailing.
RECOMMENDED SAIL USERecommended Apparent Wind Angle: 100 – 150 degrees
Recommended Apparent Wind Speed: 4 – 16 knots
RACING LAMINATE JIB UPGRADE Part Number 1260-25-05
This Doyle racing laminate jib upgrade uses GPL LiteSkin Cloth. The sail offers increased performance and lower stretch over standard dacron. This upgrade offers radial cut construction and also modifies the sail shape from high roach to squaretop design which includes an innovative jackline design to enable the head to fold into the bag automatically once the halyard tension is removed. This upgrade offers radial cut construction and incorporates a UV shield to protect the laminate when furled.
GPL LiteSkin
An increased abrasion resistance combined with a minimum of additional weight: This is the formula that guided us when developing our GPL Lite Skin®. The result is a composite product addressing an overlapping concern for both racers and cruisers, looking for a rugged sailcloth skin with an increased durability. Lite Skin® comes as a sheet of random array composed of non-woven filaments. It has an eye-catching look, as our experts have further accented it with an opaque finish that virtually eliminates the traditional paneled sail appearance. Instead owners and crew will enjoy the new sleek visual look. In comparison to standard film/film and taffeta products Lite Skin® stands out, is available in six different weight disciplines and marks a class of its own.
Note:
The UV strip is color matched to the sail color providing a virtually invisable UV protection for your sail.
|
RACING LAMINATE MAIN UPGRADE Part Number 1260-25-06
This Doyle racing laminate square top mainsail upgrade uses GPL LiteSkin Cloth. The sail offers increased performance and lower stretch over standard dacron. This upgrade offers radial cut construction and also modifies the sail shape from high roach to squaretop design which includes an innovative jackline design to enable the head to fold into the bag automatically once the halyard tension is removed.
GPL LiteSkin
An increased abrasion resistance combined with a minimum of additional weight: This is the formula that guided us when developing our GPL Lite Skin®. The result is a composite product addressing an overlapping concern for both racers and cruisers, looking for a rugged sailcloth skin with an increased durability. Lite Skin® comes as a sheet of random array composed of non-woven filaments. It has an eye-catching look, as our experts have further accented it with an opaque finish that virtually eliminates the traditional paneled sail appearance. Instead owners and crew will enjoy the new sleek visual look. In comparison to standard film/film and taffeta products Lite Skin® stands out, is available in six different weight disciplines and marks a class of its own.
JACK LINE DESIGN
SCREECHER CRUISING 66SQM, CONTINUOUS FURLER & SHEETS Part Number 1260-25-07
For cruisers who want every bit of extra performance, Doyle Sails has developed a specialized downwind code sail for easy handling. This screecher is a highly specialized sail used to sail high reaching angles and flies with a straight luff, allowing for easy sail trim for optimum reaching performance. The tight luff also allows the sail to be easily depowered by simply easing the sheet or tweeker, as the design allows it to twist off more like a conventional headsail, without collapsing like a spinnaker. Covering a wide wind range, combined with a furling system, these sails are a popular choice for the sailor who is looking for an easily handled sail to improve their reaching and light air performance. The sail is designed in high strength materials and fibers to ensure optimum durability.
This option includes the sail, furler, sheets and a 2:1 halyard upgrade. This sail can only be used if the bowsprit and screecher deck hardware is first optioned.
Doyle Dacron Sailcloth - White color: Polyester’s desirable properties include excellent resiliency, high abrasion resistance, high UV resistance, high flex strength and low cost. Low absorbency allows the fiber to dry quickly.
RECOMMENDED SAIL USE
Recommended Apparent Wind Angle: 50 – 100 degrees
Recommended Apparent Wind Speed: 4 – 16 knots
SCREECHER PERFORMANCE CRUISING 66 SQM, CONTINOUS FURLER & SHEETS Part Number 1260-25-10
For cruisers who want every bit of extra performance, Doyle Sails has developed a specialized downwind code sail for easy handling. This screecher is a highly specialized sail used to sail high reaching angles and flies with a straight luff, allowing for easy sail trim for optimum reaching performance. The tight luff also allows the sail to be easily depowered by simply easing the sheet or tweeker, as the design allows it to twist off more like a conventional headsail, without collapsing like a spinnaker. Covering a wide wind range, combined with a furling system, these sails are a popular choice for the sailor who is looking for an easily handled sail to improve their reaching and light air performance. The sail is designed in high strength materials and fibers to ensure optimum durability.
This option includes the sail, furler, sheets and a 2:1 halyard upgrade. This sail can only be used if the bowsprit and screecher deck hardware is first optioned.
Developed from our successful Aramid X-Tech line, the new BX-Tech fabrics continue the trend toward a more balanced base construction for warp oriented laminates. The base 0-90 Technora scrims in this line are fill oriented for better luff to leech strength, critical in increased life for roller furling and over-lapping headsails. The Technora yarn also offers high flex and impact durability due to high tenacity. The Black Aramid warp fibers provide load-line strength in tri-radial construction, and the black dye increases UV resistance over the life of the sail. Targeted for the serious racer in boats up to 42´, BX-Tech is a hybrid innovation that combines the best properties of similar fibres to create a long lasting fabric that will perform to the owner´s expectation
RECOMMENDED SAIL USE
Recommended Apparent Wind Angle: 50 – 100 degrees
Recommended Apparent Wind Speed: 4 – 16 knots
TOP DOWN FURLING GENNAKER SW1260 Part Number 1260-25-08
Top-down furling systems were originally designed for hard-core ocean racers, but they can make ripping downwind even more accessible for cruising crews and shorthanded sailors too.
Here are five reasons why top-down furling systems are awesome for asymmetrical spinnakers:
Makes spinnaker sailing as easy as deploying the genoa. In light winds, you can have the spinnaker hoisted and ready to go. As soon as you turn down, all you have to do is release the furling line, pull on the sheet, and voila! Instant gratification.
Foredeck union on strike? No problem. Since you can have the spinnaker rigged and ready to go before you even leave the dock, you can get the kite flying right from the cockpit. And in shifty situations when you’re sailing shorthanded or with inexperienced crew on board, a top-down furler makes flying a spinnaker a whole lot safer. “This is a great system for shorthanded sailors because you can deploy and furl the spinnaker from the safety of the cockpit,” says Scott Williman of Seldén Mast.
No more shrimping. Sail an angle as hot as you want, and douse at the last possible moment. Even with an inexperienced crew, there’s no chance of shrimping the kite. With a top-down furler, every douse will look like it was done by the pros. “You can sail a really hot angle to the wind with no risk of shrimping the kite,” says Ronstan’s Alan Prussia.
Takes the excitement out of gybing. An exciting gybe is often not a safe or fun gybe. Furl the sail partially or even fully before gybing and then easily re-deploy on the other side. A top-down furler limits the number of people you need to complete a gybe, and keeps the excitement in the sailing.
RECOMMENDED SAIL USERecommended Apparent Wind Angle: 100 – 150 degrees
Recommended Apparent Wind Speed: 4 – 16 knots
NOTE:
This option must be ordered in conjunction with: MPS Deck Hardware, Bowsprit and Screecher Deck Hardware and Screecher, Furler & Sheets options.
FACTORY COMMISSIONING & HANDOVER (THAILAND) Part Number 1260-26-04
Taking delivery of a new boat can be a daunting prospect let alone in a foreign country, so we at Seawind have developed a handover process that we feel best equips our customers to take on the challenge with confidence, excitement and with the goal of making some wonderful sailing memories. Taking delivery of your new vessel in Ocean Marina, Pattaya - Thailand, you are on the doorstep of an incredible sailing destination with many close islands, beaches and anchorages to go and explore whilst remaining close to our service base. Ocean Marina is a world class marina with on-site hotel, restaurants, full haul out facilities, chandlery and supporting specialist trades such as electrical, canvas and paintwork.
Ensuring the boat has had thorough testing prior to handover, we firstly launch and test your catamaran at the factory in Vietnam and secondly by way of an extensive 4-6 day delivery sail from HCM to Ocean Marina, Pattaya. These processes are closed to customers onboard, as our target to handover a boat in Thailand once the initial round of bedding-in items have already been addressed.
- * Factory Launch: 3-5 Day launch and commissioning by the Seawind factory team in HCM.
- * Post launch shake-down delivery sail to Ocean Marina by Seawind Factory Team.
- * Post delivery sail tidy-up work session
- * 3 Day Customer handover by our Thailand Service Manager
- Day 1: Technical handover of all systems
- Day 2: On the water handover with focus on the all aspects of safety such as reefing; anchoring; docking and sail deployment.
- Day 3: Typically a mix of on water and systems review but as needs require.
The options includes transfers from Bangkok airport to your resort, hotel or accommodation of choice, as well as 3 days berthing at the marina.
To have clear access to all areas of the boat for handover, it is best to be land based for accommodation until day 3 of the handover. Both hotel accommodation and marina berthing can be obtained at discounted rates for Seawind customers as required
It is highly recommended to stay local for the first week of getting used to the boat and then going further afield to the local Islands. Route planning should include a return trip to Ocean Marina between month 1 & 2, or prior to leaving Thailand to ensure adequate time to resolve any commissioning items. They do happen, they are part of boating life, so let’s plan it into the schedule to tackle them before the boat is away from the factory and customer service resources.
Required equipment/options include:
- Safety Kit
- Dingy & Outboard
- Navigation kit (including AIS transceiver) & charts
Recommended options/equipment include:
- Liferaft
- Sat Phone
- Sentinel Marine, Vessel Monitoring
- Watermaker
Mandatory Documentation includes:
- Vessel Registration & Insurance
- VHF Radio License
- AIS / Epirb MMSI Number