Seawind 1170

STANDARD SPECIFICATIONS AND EQUIPMENT – OWNERS 3 Cabin Version

1. GENERAL:

• • The overall finish of the Seawind 1170 will be consistent with a luxury world-standard yacht of this size and type. Only very high quality equipment is used throughout.

2. CONSTRUCTION:

• • Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas.
  • Hull Laminate: Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate. Infused Polyester resin elsewhere. Laminate specifications are certified to CE standards.

3. MAST/BOOM/SAILS:

• • Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
  • Standing Rigging – Forestay 3/8 (10mm) 1 x 19 Dieform wire.
    – Sidestays 3/8 (10mm) 1 x 19 Dieform wire
    – Diamonds 5/16 (8mm) 1 x 19 Dieform wire.
  • Halyards – Main halyard: 12 mm Spectra rope : Heavy duty shackle.
    – Jib halyard: 8 mm Spectra rope. Heavy duty shackle.
    – Topping lift: 10 mm rope, Heavy duty shackle.
    – Spinnaker Halyard: 10mm rope with snap-shackle spliced to end.
  • Boom outhaul.
  • 2 x mainsail single line reefing fitted.
  • Main halyard & reefing lines to be led back to cockpit through turning blocks and rope clutches.
  • Fully battened dacron mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens + batten cars.
  • Cruising mainsail cover with integrated lazy jack system.
  • Self-tacking dacron headsail with furler. Curved headsail traveller track with end stops.

4. DECK EQUIPMENT:

• • Flush mounted hatches & portholes (12 in total)
    4 x Forward deck hatches 470mm x 470mm
    2 x Mid cabin deck hatches 470mm x 470mm
    1 x Port mid cabin window hatch 507mm x 377mm
    1 x Port bathroom window hatch 507mm x 377mm
    1 x Port bathroom rear step portlight 600mm x 150mm
    1 x Galley window hatch 507mm x 377mm
    1 x Aft cabin window hatch 507mm x 377mm
    1 x Aft cabin rear step portlight
  • Fibreglass Deck Hatches:
    Forward anchor & storage hatches x 5
  • 6 x Docking cleats: Bow, mid & stern cleats on each hull.
  • 1 x Heavy duty mooring cleat on forward walkway.
  • Ventilation: 2 x forward cabin hatch vents.
  • Mast base turning blocks.
  • 12 x Rope clutches.
  • Sheet winches :
  • 1 x 45 – 2 speed self tailing  at stbd helm
    2 x 40 – 2 speed self tailing at port and stbd helm
    1 x 40 – 2 speed self tailing at mast
  • Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. 700mm high for premium offshore safety – exceeding CE Category A requirements.
  • 2 x Transom access gates with pelican hook releases.
  • 2 x side access gates with pelican hook releases.
  • Aft swim ladder: Telescoping stainless aft swim ladder with flat tread for comfort.

5. NAVIGATION/HELM

• • Steering compass at port & stbd helms.
  • GRP Helm seats with ice box under port side and storage plus gas locker under stb side.
  • Primary Helm (port) raised upholstered helm seat with folding backrest

6. FORWARD BEAM, CATWALK AND TRAMPOLINES:

• • Aluminium forebeam.
  • Pelican striker and adjustable cable.
  • 1 x Mooring rollers above foredeck.
  • 2 x Anchor roller under deck. Permanent stowage position for Plough (Delta type) anchor.
  • Catwalk in foam-sandwich fibreglass.
  • Plastic coated open weave trampolines.

7. AFT BEAM & DECK:

• • Moulded fibreglass Targa Bar with curved mainsheet track.
  • Lounge seating at aft beam.
  • Full width hard top over cockpit.
  • Windows over helms for sail visibility.
  • Dinghy davits mounted from aft targa supports.

8. STEERING / RUDDER SYSTEM:

• • Twin raised helm stations (dual) with: 2 X 32” composite steering wheels.
  • Both wheels independently linked to steering system. – System offers back-up redundancy.
  • Carbon fibre cross bar – rudder linkage.

9. INTERIOR

• • Lightweight, modern interior design.
  • Synthetic timber flooring.
  • Sides and cabin top lined with vinyl or moulded gelcoat.

10. SALOON

• • Polished timber dining table: Lowers to create coffee table or double bed.
  • Upholstered settee.
  • Nav station and chart table
  • 2 x Large forward opening windows providing significant ventilation.
  • Saloon windows in toughened glass.
  • Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Cockpit roof
  • Electric helm windows.

11. GALLEY

• • Spacious galley with Polystone counter surfaces, timber accents.
  • Twin burner LPG stove & oven. Stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
  • Double bowl stainless steel sink.
  • Pressure hot & cold fresh water system. Single lever mixing tap.
  • Refrigerator: Front opening fridge
  • Spacious freezer: 150 litre top loading.
  • Under bench storage with polished timber door fronts & cutlery drawers.
  • Pantry / crockery cupboard
  • Inboard side of galley: Over-bench cupboard with timber polished timber finished fronts..
  • Trash bin
  • LPG solenoid control in galley.

12. SLEEPING CABINS

• • Port Side Owners Cabin
  • Stbd Forward and Stbd Aft Guest Cabins
  • Timber doors on all private cabins.
  • Port & Starboard fwd cabins : Each queen sized berth
  • Aft Starboard cabin : Double berth
  • Mattresses to be 150mm (6”) quilted foam upholstered.
  • Cabins lined.
  • 12 volt lighting.
  • Storage/Cupboards.
  • Simulated timber flooring.

12. PORT HEAD:

• • Polished timber lockable door.
  • Manual toilet. Discharge via holding tank.
  • Holding tanks built in. Discharge Pump out by shore station or directly overboard.
  • 130L Waste tank
  • Composite skin fittings and sea-cocks, to meet CE requirements and easily accessible
  • Vanity basin with pressure hot & cold water.
  • Separate shower stall with clear glass door. Wall mounted shower head & mixer tap.
  • Electric shower bilge pump with direct overboard discharge.
  • Large quantity cupboards / shelves to very high quality.

13. STARBOARD HEAD:

• • Timber lockable door.
  • Manual toilet. Discharge via holding tank.
  • Holding discharge via shore station pump out or via direct discharge.
  • Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
  • Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
  • Cupboard/shelves to very high quality.
  • Toilet roll holder, towel rack & mounted mirror.

14. LIGHTING/ELECTRICAL SYSTEM:

• • High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
  • Marine grade tinned electrical wiring with extensive use of heat sealed connectors.
  • Batteries x 3 comprising:  2 x 12v 200Ah Deep Cycle House Gel Batteries to give total 400Ah. 1 x AGM Start batteries
  • 230amp heavy duty isolation switch.
  • 12v lighting : Numerous 12v interior lamps and courtesy lights throughout.
  • Red night lights in cockpit for night sailing
  • 3 x USB outlets:
    – Nav desk
    – Port fwd cabin
    – Stbd fwd cabin
  • 1x 12v outlet:
    – Port helm
  • CE approved navigation lights.
  • Deck / Steaming combination light
  • Mast head anchor / riding light.
  • 2x 160w flush mounted solar panels and 25amp regulator.

15. PLUMBING/FRESH WATER TANKS:

• • Pressure hot & cold water system to galley & both bathrooms with single lever mixer
  • Hot water storage system (40 liter / 8.8 gallons) .
  • Fresh water tank: 500 litres (132 gallons). Remote deck filler.
  • Electric fresh water pump and accumulator/surge tank.
  • Fresh water tank gauge.
  • Electric bilge pumps (2) with controls integral with master battery switch panel.
  • Float Switches with high level alarms (2).
  • Manual bilge pumps (2) in each hull.
  • Manual toilets in each head.
  • Port bathroom with separate shower stall.
  • Starboard bathroom with dual purpose faucet & shower.
  • Electric sump pump for shower drain.
  • 2 x LPG bottles – 4.5kg galvanised.

16. ENGINES:

• • Twin Yanmar 29hp saildrive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fibreglass bed with integral oil drip pan.
  • Three blade fixed propellers.
  • Dual engine controls at port helm station.
  • Helm console mounted engine instruments with push button start, tachometers, engine monitoring, warning systems & engine hour meters.
  • Fuel tanks: Total 520 litres (135 gallons)
  • Water intakes for engines protected by external strainer. (1 per engine)
  • Primary Racor (or similar) water separator / fuel filter (1 per engine)
  • Engine, fuel tank & fuel line installation to CE standards to meet offshore requirements.

17. ANCHORING / MOORING:

• • Electric anchor winch with chain, located in foredeck locker to give a clean deck.
  • Primary anchor is 45 lb  Delta anchor type with 55m x 8mm short link galvanised chain.
  • Primary anchor is stored in a specially designed anchor roller under the catwalk.
  • Anchor winch has up switch at the winch plus a remote up / down control at the helm station.
  • 3 x PVC Inflatable Fenders
  • 4 x Mooring lines (each 15 metres x 14mm).

18. ANTIFOULING / STRIPING:

• • Epoxy barrier coat plus 2 coats of high quality antifouling bottom paint.
  • Seawind 1170 decals on each hull and stern.

 DISCLAIMER : The specifications above may change at the discretion of Seawind Catamarans.